Operation Manual
11
English
Orbiter
• If your radio fails to access the network, please do the following:
a. Check your Router, see if it is working normally or not.
b. Check your LAN cable, make sure it hasn’t been damaged,
c. Make sure the port of the cable inserted into the LAN socket is rmly connected.
Step 2 – Enter Internet Radio mode
Step3 – Shift to Wireless Network
Continue the steps above, after your radio has access to the wired network, press MENU →
< Internet radio >, press the SCROLL knob to conrm.
Or, press MODE repeatedly until < Internet Radio > is displayed, stop pressing.
Note: to make this order work, you can either do a ‘Reset to Default’, or follow the steps below:
1. Press MENU → < Conguration > → < Network > → < Manual Conguration > → < Wireless >, press
the SCROLL knob to conrm.
DHCP (On) and DHCP (O)
Input your assigned SSID
You might want to delete your current router setting, follow this path as your radio demonstrated.
DHCP:
Enter SSID:
Manage:
2. When the cursor points to < DHCP > → DHCP (On), press the SCROLL knob to conrm, and then step by step to access
the wireless network. Now, setting to wireless is OK!