Operation Manual

11
English
Slicer
Chapter 2 - Internet Radio Mode
2.1 Turning on
1. Connect to your Internet Radio adapter and ensure the power LED lights up, extend antenna.
2. Press the button to switch on your radio, for initial use, a welcome message will be given by
your radio and then you will be asked if you want to start ‘Setup wizard’.
2.2 Setup Wizard
1. Continue above step, press SELECT to conrm ‘YES’ and then turn SELECT to your preferred
‘hour format’, press to conrm.
2. Press SELECT to conrm ‘Update from Network’, and then follow your radio’s instructions and
congure the following parameters:
P Time zone: select your local time zone.
P Daylight savings: On or O
P Wlan region: Most of Europe/USA/Canada/Spain etc.
P SSID: In some cases, your radio may nd more than one network. Turn SELECT to your
favorite one, press to conrm.
Note: If your network is not congured to request a password (WEP/WPA), the radio will connect to
this network and display the picture shown on the left.