Operation Manual
3
English
Slicer
Some Do’s And Don’ts On the Safe Use Of Equipment
This equipment has been designed and manufactured to meet
international safety standards but, like any electrical equipment,
care must be taken if you are to obtain the best results and safety is
to be assured.
DO read the operating instructions before you attempt to use the
equipment.
DO ensure that all electrical connections (including the mains
plug, extension leads and inter-connections between the pieces
of equipment) are properly made and in accordance with the
manufacturer’s instructions. Switch off and disconnect the mains
plug before making or changing connections.
DO consult your dealer if you are ever in doubt about the
installation, operation or safety of your equipment.
DON’T remove any xed cover as this may expose you to
dangerous voltages.
Overheating will cause damage and shorten the life of the
equipment.
DON’T allow electrical equipment to be exposed to dripping or
splashing liquids, and don’t allow objects lled with liquids, such
as vases, to be placed on the equipment.
DON’T place hot objects or naked ame sources such as lighted
candles or nightlights on, or close to equipment. High temperatures
can melt plastic and lead to res.
DON’T listen to headphones at high volume, as such use can
permanently damage your hearing.
DON’T leave equipment switched on when it is unattended. Switch
off using the switch on the equipment and make sure that your
family knows how to do this. Special arrangements may need to be
made for disabled or handicapped people.
DON’T continue to operate the equipment if you are in any doubt
about if it’s working normally or if it’s damaged in any way. Switch
it off and disconnect the mains plug and consult your dealer.
ESD Remark: In case of malfunction due to electrostatic discharge,
just reset the product (reconnection of power source may be
required) to resume normal operation.
NOTE: Do not open any covers and do not repair yourself.
Qualied personnel must perform repair work.
NOTE: This unit will become warm when used for a long period of
time. This is normal and does not indicate a problem with the unit.