Operation Manual
12
English
How to Set Audio to ‘Forced Mono’?
P By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss).
P To play weak stations in mono, please follow the 2 steps below:
1. Press MENU→ turn SELECT to < Audio setting >, press SELECT to conrm.
2. Turn SELECT to browse options: ‘Stereo allowed’ and ‘Forced mono’, then press SELECT
to conrm ‘Forced mono’, and it is done!
Setting Station Presets (DAB and FM Mode)
Note: To carry out this setting, make sure no other setting is selected.
Your radio can store 20 DAB/DAB+ and 20 FM presets.
Shortcut for storing the current station to preset 1-4:
Press and hold one of PRESETS buttons 1-4 until it says ‘Preset X stored’.
Normal way of storing the current station to preset 1-20:
1. Press and hold the PRESETS button until it says ‘Preset Store < 1: (empty) >’, turn SELECT to your
preferred preset number, press SELECT to conrm, it will tell you ‘Preset XX stored’, and it is done!.