User's Manual

This camera must use a brand high-speed SD card of C10
or above.
Micro SD card Instruction:
Follow the marking next to the Micro SD card slot and
push the SD card into the card slot until the card is fully
inserted. To remove the SD card, gently press the end of
the memory card inward and the memory card will pop up.
If the memory card is in one of the following conditions,
the recorded data may be damaged:
- The memory card is not used properly.
- When recording, deleting (formatting) or reading, turn
off the power or remove the memory card.
Note: The memory card gets hot after long use. This
situation is perfectly normal.
3.Quick Start Guide
Power On
Unfold the LCD，the device will be powered on
automatically.
Or you can press the power button around 2seconds to
power on the DV.
Power Off
Fold the LCD, the DV will be powered off automatically.
Or you can press the power button around 2seconds to
power off the DV.