Specifications

1. Smartphone Bracket: Holds smartphone steady.
2. Pan Motor: 320° rotation, responsible for the left and right stabilization of the picture.
3. Charging indicator:
When charging, red light always on.
Fully charged, green light always on.
4. Joystick: Adjust the shooting angle up, down, left or right according to the pushing direction.
5. Mode switching: Locked mode(The camera faces the fixed direction); Half-follow mode(Turn left or right
correspondingly with handle); Full-follow mode(the framing picture follows the direction of rotation of the handle
while following the direction of the handle pitching operation).
6. 1/4 Threaded Hole: Tripod bracket interface.
7. Shooting Mode: Connect Bluetooth in power on state, and click it to control picture shooting and video recording.
8. Power ON / OFF: ①Long press 3 seconds to power on. Long press 3 seconds to power off.
② Double-press the power on key, and the stabilizer returns to the initial setting.
9. Working status indicator：
① Power on: Red and Green flashing.
② Standby: Green light always on.
③ State transition: Green light flashing.
④ Low voltage: Red light flashing.
10. Tilt Motor: 320° rotation, responsible for the up and down stabilization of the picture.
11. Balance adjustment arm: Responsible for balancing the horizontal direction of mobile phone.
12. Balance Knob: Balance bracket position fixed knob.
13. Roll Motor: 320° rotation, Responsible for holding the mobile phone to a vertical position with the handle.
14. Bracket locking knob: Lock mobile phone bracket.
15. Micro-USB Charging Port: Insert Micro-USB cable to charge the stabilizer.