SDS
Page:5/11
Version:
Report
version.Re
port
version Date of issue/Date of revision:
Validity date***. Date of previous issue: 00/00/0000
clothing and protective equipment before entering eating areas. See
also Section 8 for additional information on hygiene measures.
Conditions for safe storage,
including any incompatibilities
:
Store in accordance with local regulations. Store in original container
protected from direct sunlight in a dry, cool and well-ventilated area,
away from incompatible materials (see Section 10) and food and
drink. Keep container tightly closed and sealed until ready for use.
Containers that have been opened must be carefully resealed and kept
upright to prevent leakage. Do not store in unlabeled containers. Use
appropriate containment to avoid environmental contamination.
Section 8. Exposure controls/personal protection
Control parameters
Occupational exposure limits
None.
Appropriate engineering controls :
Use only with adequate ventilation. Use process enclosures, local
exhaust ventilation or other engineering controls to keep worker
exposure to airborne contaminants below any recommended or
statutory limits.
Environmental exposure controls :
Emissions from ventilation or work process equipment should be
checked to ensure they comply with the requirements of
environmental protection legislation. In some cases, fume scrubbers,
filters or engineering modifications to the process equipment will be
necessary to reduce emissions to acceptable levels.
Individual protection measures
Hygiene measures :
Wash hands, forearms and face thoroughly after handling chemical
products, before eating, smoking and using the lavatory and at the end
of the working period. Appropriate techniques should be used to
remove potentially contaminated clothing. Wash contaminated
clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Eye/face protection :
Protective eyewear.
Skin protection
Hand protection :
Protective gloves are not required, but may be used in situations were
significant contact is expected.
Body protection :
Wear long-sleeved shirt, long pants, shoes with socks., Remove and
wash contaminated clothing before reuse.
Other skin protection :
Appropriate footwear and any additional skin protection measures
should be selected based on the task being performed and the risks
involved and should be approved by a specialist before handling this
product.
Respiratory protection :
Use a properly fitted, air-purifying or air-fed respirator complying
with an approved standard if a risk assessment indicates this is