Product Label
14 15
PEST CONTROL ON OUTSIDE SURFACES AND AROUND BUILDINGS
Follow additional Application Restrictions for Residential Outdoor Surface and Space
Sprays below.
Applications to vertical exterior surfaces (e.g., foundations) are permitted to a maximum
height of 3 feet from ground level. Sections of vertical exterior surfaces that abut non-porous
horizontal surfaces can only be treated if either 1) these sections are protected from rainfall
and spray from sprinklers or 2) they do not drain into a sewer, storm drain, or curbside gutter
(e.g., not to sections that abut driveways or sidewalks that drain into streets).
This product may be applied to the following sites:
• Eaves
• Exterior siding
• Foundations
• Garages
• Lawns; including grass areas adjacent or around private homes, duplexes, townhous
-
es, condominiums, house trailers, apartments complexes, carports, garages, fence
l
ines, storage sheds, barns, and other residential and non-commercial structures
• Outside surfaces of buildings
• Other areas where listed pests are present
• Patios
• Porches
• Refuse dumps
• Soil
• Trunks of woody ornamentals
• Window frames
Additional Application Restrictions for Residential Outdoor Surface and Space
Sprays:
All outdoor applications must be limited to spot or crack- and crevice treatments only, except
for the following uses:
1. Treatment to soil or vegetation around structures;
2. Applications to lawns, turf and other vegetation;
3. Applications to building foundations, up to a maximum height of 3 feet.
Other than applications to building foundations, all outdoor applications to impervious
surfaces such as sidewalks, driveways, patios, porches and structural surfaces (such as
windows, doors and eaves) are limited to spot and crack-and-crevice applications only.
For the desired application rate, use the chart below to determine the amount of this product
for 1 gallon of nished emulsion.
HDX INDOOR/OUTDOOR INSECT CONTROL OUTSIDE SURFACES
APPLICATION DILUTION CHART
Concentration of Active Ingredient Dilution Rate
0.02% 0.33 . oz. per 1 gal. water
0.06% 1.0 . oz. per 1 gal. water
Follow the application instructions in the table below to control target pests.