Use and Care Manual
WDH100401A V-S 10/10
WARNING: This product or its power cord may contain
chemicals known to the State of California to cause
cancer and birth defects or other reproductive harm.
W ash hands after handling.
Do not nail on top of another nail. This is able to cause
the nail to be deflected and hit someone, or cause the
tool to react and result in a risk of injury to persons.
Always wear eye protection Operator and others in
the work area should always wear ANSI-appr oved
safety goggles with side shields Eye protection is
used to guard against flying fasteners and debris,
which may cause severe eye injury
Always wear hearing protection when using the tool
Prolonged exposure to high intensity noise may cause
hearing loss
Use safety equipment A dust mask, non-skid safety
shoes and a har d hat must be used for the applicable
conditions Wear a full face shield if you are producing
metal filings or wood chips
Dress pr operly Do not wear loose clothing or jewelry
Contain long hair Keep your hair, clothing, and gloves
away from moving parts Loose clothes, jewelry , or
long hair can be caught in moving parts
Stay alert, watch what you are doing and use common
sense when operating a power tool Do not use tool
while tir ed or under the influence of drugs, alcohol, or
medication A moment of inattention while operating
the tool may cause serious injury
Avoid unintentional firing Keep fingers away from
trigger when not driving fasteners, especially when
connecting the tool to the air supply
Keep proper footing and balance at all times Pr oper
footing and balance enables better control of the tool
in unexpected situations
Do not use on a ladder or unstable supports Stable
footing on a solid surface enables better contr ol of the
tool in unexpected situations
Make sure the hose is free of obstructions or snags
Entangled or snarled hoses can cause loss of balance
or footing and may become damaged, resulting in
possible injury
Remove finger from the trigger when not driving
fasteners. Never carry the tool with finger on trigger, the
tool is able to fir e a fastener.
.
.
.
.
.
.
.
.
.
..
.
.
.
.
.
.
.
.
.
.
.
.
.
Table of Contents
Table of Contents-------------------------------------------------2
Safety Information------------------------------------------------3
--------------------------------------------------------3
------------------------------------------------------3
------------------------------------------------3
Safety Information(Continued)----------------------------------4
-----------------------------------4
---------------------------------------------4
Safety Information(Continued)----------------------------------5
---------------------------------5
---------------------------------------------------5
------------------------------------------------------5
------------------------------------------------------5
Safety Information(Continued)----------------------------------6
----------------------------------6
---------------------------------------------------6
W arranty-----------------------------------------------------------7
Unpacking---------------------------------------------------------7
Specification------------------------------------------------------8
Specification(Continued)----------------------------------------9
Features----------------------------------------------------------10
Operation-(Model#HDXFWS) -----------------------------------11
----------------------------------------11
-------------------------------------------11
------------------------------------------11
------------------------------------------------11
Operation(Continued)-(Model#HDXFWS) --------------------12
---------------------------------------------12
--------------------------------------12
-------------------------------------------------12
---------------------------------12
Operation(Continued)-(Model#HDXST9040) -----------------13
----------------------------------------13
-------------------------------------------13
Operation(Continued)-(Model#HDXST9040)-----------------14
------------------------------------------14
------------------------------------------------14
----------------------------------------------14
--------------------------------------14
---------------------------------------------14
Symbols
Work Area
Personal Safety
Personal Safety(Continued)
Tool Use and Care-
Tool Use and Care(Continued)
Tool Service-
Air source
Operation-
Air Supply and Connections
Loading Tool
Adjusting the Exhaust-
Loading Fasteners--
Unloading Fasteners
Clearing Jams-
Non-Marring Pad-
Setting the Air Pressur e-
Firing the Tool-
Work Contact Element(WCE)
Adjusting the Exhaust-
Loading Fasteners--
Unloading Fasteners
Clearing Jams-
Non-marring pad
Setting the Air Pressur e-
Depth Adjustment
Safety Information
Read operator’s manual To reduce the risk of injury,
user must read and understand operator s manual
before using this pr oduct.
:
’
Eye protection Always wear safety goggles safety
glasses with side shields or a full face shield when
operating this product
:,
,
.
Risk to hearing Always wear ear protection when
using this tool Failure to do so may r esult in
hearing loss
:
.
.
Risk of serious personal injury Never place hands
or any other body parts in the fastener discharge
area of the nailer the tool might eject a fastener
and could result in death or serious personal injury
:
,
.
Keep the work area clean and well lighted Cluttered
benches and dark areas increase the risks of accidents
Do not operate the tool in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust
The tool creates a spark which may ignite flammable
liquids, gases or dust
Keep bystanders, childr en, and others away while
operating the tool Distractions could r esult in improper
use and cause injury
Avoid unintentional misfires
.
.
.
.
.
.
. Always use caution to avoid
accidentally firing. Do not point towards yourself or
anyone whether it contains fasteners or not.
SYMBOLS
WORK AREA SAFETY
1.
2.
3.
4.
WARNING: Instructions pertaining to a risk of fire,
electric shock, or injury to persons.
1.
2.
3.
4.
5.
6.
7.
8.
9.
PERSONAL SAFETY
10.
11.
WARNING: To avoid serious personal injury , do not
attempt to use this product until you read the manual
thoroughly and understand it completely . Save this
manual and review frequently for continuing safe
operation and instructing others who may use this
tool.
WARNING: When using tools, basic pr ecautions
should always be followed, including the followings.
3
2
HOMEDEPOT.COM
Please contact 1-800-514-6729 for further assistance.
Operation(Continued)-(Model#HDXST9040)----------------15
-----------------------------------------------15
---------------------------------15
Firing the Tool
Work Contact Element(WCE)
Operation(Continued)-(Model#HDXBR50)-------------------16
----------------------------------------16
-------------------------------------------16
Operation(Continued)-(Model#HDXBR50) ----------------17
------------------------------------------17
------------------------------------------------17
--------------------------------------17
Operation(Continued)-(Model#HDXBR50) -------------------18
-------------------------------------------------18
---------------------------------18
Maintenance-----------------------------------------------------19
--------------------------------------------------19
----------------------------------------------------19
-------------------------------------------------------19
---------------------------------------19
Recommended Hookup----------------------------------------20
Tr oubleshooting-------------------------------------------------20
Adjusting the Exhaust-
Loading Fasteners-
Unloading Fasteners
Clearing Jams-
Setting the Air Pressur e
Firing the Tool
Work Contact Element(WCE)
Anti-dust cap
Lubrication
Cleaning
Cold weather operation