User Manual

17
Hardware Assign
The Hardware Assign screen enables you to customize how
HeadRush Gigboard’s footswitches and an expression pedal
control each rig.
To open the Hardware Assign screen, tap the  button in
the upper-right corner of the main screen, and then tap
Hardware Assign.
To return to the main screen, tap the  button in the upper-
left corner.
Important: The Hardware Assign settings are all part of the
overall rig, so remember to save your changes you want to
keep.
To set the color associated with the rig, tap it in the upper-left part of the screen. This color will appear next to
the rig name when you view a list of all available rigs or when you view and create setlists. It will also be the color
of the corresponding footswitch indicator when the HeadRush Gigboard is in Rig View.
To set the tempo of the rig’s time-based effects (delays, modulation, etc.), tap the button under Tempo to
select Current or Fixed.
Current: The rig will use the last-used tempo or the one set by the Tempo footswitch.
To set the tempo, press the Tempo footswitch at the desired tempo 3–8 times to set the new tempo in beats
per minute (BPM).
Fixed: The rig will use a tempo that you set here.
To set the tempo, turn the encoder to set the desired tempo in beats per minute (BPM). You can set the
tempo only in this Hardware Assign screen.
The MIDI Prog field determines the MIDI program change number of the rig. Use the Prog Change setting in the
Global Settings screen to determine whether the HeadRush Gigboard can send and/or receive MIDI program
change messages (see Global Settings > MIDI Settings for more information).
To set the MIDI program change number, turn the encoder to select it (0–127).
Important: If a rig is using a number, that number will be unavailable and cannot be assigned to another rig. Also,
saving a rig with a new name will save the rig but without this program change number (to prevent rigs from
sharing the same number).