User Manual

6
Operation
This chapter describes the HeadRush Gigboard’s functions.
Main Screen
Overview
Basic Operations
Important: The sequence of models in your signal chain is not necessarily reflected in the footswitches. You can
freely assign models to available footswitches without changing your signal chain at all—and vice versa. See
Hardware Assign to learn about this.
To assign a model (amp, cab, or effect) to an empty slot, tap it () and then use the list
that appears. See Rigs > Creating a New Rig to learn about this.
To show a model’s parameters on the right edge of the screen, tap the model so it is
outlined in green.
To show a model’s settings screen, double-tap it. Its settings screen will appear with
its preset menu, parameters, and assigned color.
To activate or deactivate a model, press the footswitch assigned to it, or tap the
model’s footswitch in the display.
To rearrange the
models in your signal
chain, tap and drag a
model to another slot
or between two other
models (the ones after
that position will shift
one slot further down
the signal chain).
Tap and drag this bar downward to view list of rigs.
Rig name.
Turn encoder to move
through selectable
items onscreen or to
adjust parameters.
Press encoder as an
Enter command.
Tap its footswitch to
activate or deactivate it.
Tap to view setlists.
Double-tap a model,
In, or Out to show its
parameters.
Tap to save rig.
These four blocks show the current
function of the 4 footswitches.
This button enables or
disables reverb and delay
tails when switching to
another rig.
This button toggles
between the different
routing options for a rig.