User Manual

7
To switch an amp and/or cab between a dual and single configuration, tap the 2X button next to it.
To load another rig (preset), do any one of the following:
• Tap the  or  next to the name of the current rig on the screen.
• Tap the name of the rig on the screen and then turn the encoder.
• Press a footswitch assigned to a preset when Gigboard is in Rig View.
• Press a footswitch assigned to Prev Rig or Next Rig when Gigboard is in Hybrid
View.
To create a new rig, tap the  button in the upper-right corner, and then tap New Rig.
To delete the current rig, tap the  button in the upper-right corner, and then tap Delete Rig, and then tap
Yes to continue or No to cancel.
Reverb/Delay Tail Spillover
If you have a reverb or delay effect active on your rig and then switch to a different rig, the reverb or
delay will continue to decay after switching to the second rig.
To enable or disable this feature for the current rig, tap Tail on the main screen.
The feature is unavailable if you are using an effects loop or if you are using USB audio.