User's Manual
2.4G Wireless Headphone User Manual
一、Operation Instruction
1、Insert the Power adaptor into the 100-240V AC socket,Then use
the 3.5mm plug of power adaptor connect with the DC5V outlet hole
on transmitter, if the power light get blue , indicating the transmitter link with power correctly , at the
same time the transmitter also has the function of charge. If Switch turn off ,Audio light
will not work。See belowing picture-1、2 :
Picture-1 Picture-2
2、Connect one end of the audio cable with 3.5mm to the audio output socket of the hi-fi audio
equipment(such as TV,DVD,MP3/MP4,PC or Mobile),Connect the other end of
the cable to the audio-in on transmitter . The audio light turn blue if your hi-fi equipment begin to input the signal of
audio to transmitter at the same time you should put the button to Switch ON.
Audio light will turn red if without audio signal input。See bellowing picture 3、4:
2.3
WL
孔
DC 5V
POWER Light
AUDIO Light