User Manual

5
Setup
Items not listed under Introduction > Box Contents are sold separately.
IMPORTANT! In the Global Settings Menu, make sure you set the Outputs to send signal at amp level if you are
using a traditional guitar amplifier, or line level (default) if you are using a full-range flat-response amplifier, mixer,
PA speaker or audio interface.
Guitar
Full-range, flat-response amplifier or
traditional guitar amplifier
External effect stompboxes,
modules, etc.
Computer
Power
outlet
Expression
pedal
Amp Footswitch Input
IMPORTANT! Only connect this output to amplifiers that have a
"short-to-sleeve" footswitch input. If you connect this output to
any other type of footswitch input, you may cause permanent
damage to your equipment. If you are unsure if your amplifier
has a "short-to-sleeve" footswitch input, please consult the
amplifier's manual or manufacturer to confirm before attempting.