User Manual

18
Footswitch Assignment
On the Footswitch Assign page, you can modify the functions of HeadRush Looperboard's
footswitches in an FX Rack.
To change the footswitch's LED color, tap the footswitch number on the left-side of this page to
view the selectable colors. Tap to select the color, and then tap the footswitch number again to
hide the colors.
To change the trigger behavior of the footswitch, tap the block that says either Toggle or Hold
(momentary). The text shown will be the behavior of that footswitch.
To select the FX Rack controlled by the footswitch, tap the block that shows the name of the FX
Rack (e.g., Vocal, Guitar, Lo-Fi), and then select the new FX Rack to control. To hide the selections,
tap the block with the name of the FX Rack again.
To assign a footswitch to enable/bypass all active FX within an FX Rack, tap to select the Rack
block for the footswitch.
To assign a footswitch to enable/pass individual FX within an FX Rack, tap to select the desired
FX blocks for the footswitch.
Enable/Bypass FX Rack Enable/Bypass Individual FX
Select FX Rack Edit Footswitch LED Color
Trigger
Behavior