User Manual

21
Loop Settings
Use the Loop Settings page to configure the settings for an individual loop.
To show the loop settings, tap the ••• icon in the top-right corner of the touchscreen, and then
tap Loop Settings.
General Settings:
Tempo: This setting determines the tempo of the loop. Tap the BPM on the touchscreen, and
then use the encoder to set the current loop's tempo, from 30–280 BPM.
Time Signature: This setting determines the time signature of the loop. Tap the time signature,
and then use the encoder to set the time signature of the current loop: 2/4, 3/4, 4/4, 5/4, 6/4,
7/4, 5/8, 6/8, 7/8, 8/8, 9/8, 10/8, 11/8, 12/8, 13/8, 14/8 or 15/8.
Click Settings:
Click: This setting determines the function of the click track. Set to Rec to enable while
recording and overdubbing, or set to Play+Rec to enable when playing or recording and
overdubbing. Set to Off to disable the click.
Count-In: This setting determines how the count-in feature functions. Set to On to enable the
count-in before a loop starts to play, record or overdub. Tap the Bar on the touchscreen to
adjust the number of measure for the count-in. Set to Off to disable the count-in.
Quantize Settings:
Set Loop Length: This setting determines the default loop size, if any. Set to On to enable a set
number of bars for your loops, from 0–64 bars. Tap the number to the right and then use the
encoder to set the number of bars for all loops. Set to Off
to disable the predetermined loop
length.
Quantize: This setting determines the quantization of the start and end points of your loop, if
any. Set to On to enable quantization. Tap the time division to the right and then use the
encoder to set the amount of quantization, to the nearest 1 bar, 1/2 note, 1/4 note, 1/8 note or
1/16 note. Set to Off to disable quantization.