User Manual

Reverse:

Use footswitches 3–6 to adjust the playback

direction of each looper track. If no looper track is

recorded, the track option will be grayed out.

You can also use footswitch 9 to adjust the

playback direction of all looper tracks at the same

time.

Fade:

Use footswitches 3–6 to apply a fade out to each

looper track. If no looper track is recorded, the

track option will be grayed out.

Use footswitches 10–11 to adjust the rate of the

fade out, or tap the corresponding buttons on the

touchscreen.

You can also use footswitch 9 to apply a fade out

to all tracks at the same time.

Transpose:

Use footswitches 3–6 to select a looper track to

adjust the transposition.

Use footswitch 9 to select all looper tracks at the

same time.

Use footswitches 10–11 to adjust the amount of

transposition (in semitones) for the selected track.

Use footswitch 12 to enable or disable

transposition for all tracks, whether they are

currently selected or not. If the transposition for a

track is set to 0, no change is made.

Peel:

Use footswitches 3–6 to permanently "peel off"

the last recorded layer of a looper track.

If no layers are available to be peeled, the looper

track will be grayed out.