User Manual

36
External MIDI Control
The HeadRush Looperboard can be controlled by incoming MIDI CC (control change) messages
from external MIDI gear. These MIDI messages can be received from hardware connected to the
USB Type-A Ports or the 5-pin MIDI Input.
Tip: You can enable or disable this feature and change the MIDI Channel used for HeadRush
Looperboard to receive messages in the Global Settings menu.
The chart below lists the available parameters that can be controlled by external MIDI hardware:
MIDI Control: Variable Parameters
CC# Data Range Parameter
3 0–60
Footswitch Actions
7 0–127 Master Level
9 0–127 Phones Level
14 0–127 Track 1 Volume
15 0–127 Track 2 Volume
20 0–127 Track 3 Volume
21 0–127 Track 4 Volume
22 0–127 Track 1 Pan
23 0–127 Track 2 Pan
24 0–127 Track 3 Pan
25 0–127 Track 4 Pan
26 0–127 Backing Track Volume
27 0–127 Backing Track Pan
28 0–127 Click Track Volume
29 0–127 Click Track Pan
85 0–127 Output 1 Volume
86 0–127 Output 2 Volume
87 0–127 Output 3 Volume
88 0–127 Output 4 Volume
89 0–127 Input 1 Pan
90 0–127 Input 2 Pan
91 0–127 Input 3 Pan
92 0–127 Input 4 Pan
93 0–127 Expression Pedal
94 0–99 Fade Rate