Use Instructions

Instructions for Use
QSL01-001-rev8.0-A
HS01-019
Page 11 of 42
Packaging
Table 2-2: Packaging Contents
Part
Product Code
Old Product Code
QTY
Nurochek Headset
HS01-001
CRY09-01
1
Nurochek Foam Cylinders (100-pack)
HS01-092
CRY09-213
1
Nurochek Strap
HS01-059
CRY09-161
1
Charger
HS01-014
CRY09-46
1
Charger Blades Kit (includes USA, AU, EU, UK blades)
HS01-093
CRY09-214
1
Instructions for Use
HS01-019
CRY09-71
1
Nurochek EVA pouch
HS01-228
CRY09-383
1
Disclaimer: Old product code apply to NUROCHEK-I system manufactured prior to 19-Oct-2020.
Packaging should be intact upon receipt. All contents should be carefully checked for damage prior to use.
Damaged packages or contents should not be used and should be returned to manufacturer. Manufacturer details
are in section 1.6.
Saline solution is not supplied as part of the packaging.
2.2.1 Storage and Handling
All components should be stored, handled and transported in the EVA pouch under dry and ambient conditions.
See cleaning instructions in section 3.7, page 18.
The Headset is not waterproof. Avoid spraying, pouring or spilling any liquid on the Headset except when
directed by the instructions.
All components and packaging should be treated with care. Improper use or handling may lead to damage or
improper functioning of the device.
Store Headset securely to prevent non-authorized access.
Insert and then dampen foam cylinders carefully with normal saline (not supplied) to prevent excess liquid spillage
onto rear of Headset, connectors and charging port.
Always ensure charging port cover is present, intact and pressed into place after disconnecting charger and before
cleaning or use.
2.2.2 Use Lifetime
1,500 light stimulus cycles.