Use Instructions
Table Of Contents
- Chapter 1: Introduction and Product Safety Information
- Chapter 2: Product Introduction
- Chapter 3: Headset and Application Use
- 3.1 Minimum System Requirements
- 3.2 Cybersecurity
- 3.3 First Time Setup
- 3.4 App Navigation
- 3.5 Device Association
- 3.6 Subject Information Management
- 3.7 Cleaning
- 3.8 Test
- 3.9 Help Screens
- 3.10 Headset Management
- 3.11 Firmware Upgrade
- 3.12 Charging
- 3.13 LED Indicators
- 3.14 Account Settings and Logout
- 3.15 Other Settings
- Chapter 4: Troubleshooting
- Chapter 1: NOTE: The Headset when powered off enters a sleep mode, in which the device will draw less power but still drain the battery overtime if not placed on charge. It is recommended that if the device is to be used within 2 weeks of powering off...
- Chapter 5: Legal
Instructions for Use
QSL01-001-rev8.0-A
HS01-019
Page 27 of 42
l)
The Test Results screen will appear when test is complete. The
results will be automatically uploaded to the secure database.
The results screen is scrollable and contains several features:
• Results can be viewed and overlaid with baseline results
via the ‘Baseline is ON/OFF’ toggle
• The current reading can be set as the subject’s baseline
by selecting ‘SET AS BASELINE’.
• The circle below the graph (highlighted by the red circle
on the right) corresponds to the stimulus frequency.
• The Nurochek Number is the change in signal response
(peak amplitude at 15Hz) from the subjects nominated
baseline observation.
• The Signal-to-Noise Ratio (SNR) is the ratio between the
amplitude of the stimulated frequency (15Hz) and the
background noise.
• Notes can be added by writing in the ‘Comments’ field.
• To receive an email of the results data, select ‘SEND ME
RESULT’.
m)
After viewing the results, you can either:
• Return to the Tests tab by selecting ‘Back’
• Quit the App
The Nurochek App should not be left open when not in use.
Help Screens
The App has various in-built help screens which provide extra information and troubleshooting for most of the
App’s functions.