Use Instructions
Table Of Contents
- Chapter 1: Introduction and Product Safety Information
- Chapter 2: Product Introduction
- Chapter 3: Headset and Application Use
- 3.1 Minimum System Requirements
- 3.2 Cybersecurity
- 3.3 First Time Setup
- 3.4 App Navigation
- 3.5 Device Association
- 3.6 Subject Information Management
- 3.7 Cleaning
- 3.8 Test
- 3.9 Help Screens
- 3.10 Headset Management
- 3.11 Firmware Upgrade
- 3.12 Charging
- 3.13 LED Indicators
- 3.14 Account Settings and Logout
- 3.15 Other Settings
- Chapter 4: Troubleshooting
- Chapter 1: NOTE: The Headset when powered off enters a sleep mode, in which the device will draw less power but still drain the battery overtime if not placed on charge. It is recommended that if the device is to be used within 2 weeks of powering off...
- Chapter 5: Legal
Instructions for Use
QSL01-001-rev8.0-A
HS01-019
Page 29 of 42
Firmware Upgrade
When a firmware upgrade is available, a notification will be displayed prompting an upgrade to occur. Prior to a
firmware upgrade, the Headset should be fully charged.
a)
To begin the upgrade process, select ‘Upgrade Now’.
b)
To continue with the upgrade, select ‘upgrade now’.
c)
The Headset will then be disconnected from the smartphone. To
reconnect the Headset and continue the upgrade process, select
‘Find Headset’.