Use Instructions
Table Of Contents
- Chapter 1: Introduction and Product Safety Information
- Chapter 2: Product Introduction
- Chapter 3: Headset and Application Use
- 3.1 Minimum System Requirements
- 3.2 Cybersecurity
- 3.3 First Time Setup
- 3.4 App Navigation
- 3.5 Device Association
- 3.6 Subject Information Management
- 3.7 Cleaning
- 3.8 Test
- 3.9 Help Screens
- 3.10 Headset Management
- 3.11 Firmware Upgrade
- 3.12 Charging
- 3.13 LED Indicators
- 3.14 Account Settings and Logout
- 3.15 Other Settings
- Chapter 4: Troubleshooting
- Chapter 1: NOTE: The Headset when powered off enters a sleep mode, in which the device will draw less power but still drain the battery overtime if not placed on charge. It is recommended that if the device is to be used within 2 weeks of powering off...
- Chapter 5: Legal
Instructions for Use
QSL01-001-rev8.0-A
HS01-019
Page 33 of 42
Headset on, pairing mode.
Headset low battery, pairing mode. Charge the Headset
as soon as possible.
Headset on, paired to phone.
Headset low battery, paired to phone. Charge the
Headset as soon as possible.
3.13.2 Front LEDs – feedback on the test progress
LED Status
Headset Status
Standby (not in test)
(intermittent flashing)
Current test progress: 0-24%
Current test progress: 25-49%
Current test progress: 50-74%
Current test progress: 75-99%
Current test progress: 100%. Lights will remain in this
state, then go to standby.
Test error. Refer to App for details.
Account Settings and Logout
To view account settings or logout, select the ‘Account’ tab.