Use Instructions
Table Of Contents
- Chapter 1: Introduction and Product Safety Information
- Chapter 2: Product Introduction
- Chapter 3: Headset and Application Use
- 3.1 Minimum System Requirements
- 3.2 Cybersecurity
- 3.3 First Time Setup
- 3.4 App Navigation
- 3.5 Device Association
- 3.6 Subject Information Management
- 3.7 Cleaning
- 3.8 Test
- 3.9 Help Screens
- 3.10 Headset Management
- 3.11 Firmware Upgrade
- 3.12 Charging
- 3.13 LED Indicators
- 3.14 Account Settings and Logout
- 3.15 Other Settings
- Chapter 4: Troubleshooting
- Chapter 1: NOTE: The Headset when powered off enters a sleep mode, in which the device will draw less power but still drain the battery overtime if not placed on charge. It is recommended that if the device is to be used within 2 weeks of powering off...
- Chapter 5: Legal
Instructions for Use
QSL01-001-rev8.0-A
HS01-019
Page 35 of 42
3.15.2 Privacy Notice
The privacy notice can be accessed through the App.
Select ‘Privacy Notice’ in ‘Other Settings’ to access the Privacy Notice.
3.15.3 About
Information about Nurochek can be accessed through the App.
Select ‘About’ in ‘Other Settings’ to view regulatory information about
Nurochek.
3.15.4 Settings
Additional settings can be changed to alter App behaviour.
Select ‘Settings’ in ‘Other Settings’ to change additional App settings.
‘Show result after test’ can be toggled ‘YES/NO’ to display or hide the result
is immediately after a test is run.
‘Show historic results’ can be toggled ‘YES/NO’ to display or hide the historic
results under each subject.
Both settings are defaulted to ‘Yes’.