Safety Information

Page 29 of 63 Report No.: CQASZ20210400194S
IEC 62368-1
Clause Requirement + Test Result - Remark Verdict
Compliance with cemented joint requirements
(Specify construction) .......................................... :

G.13.5 Insulation between conductors on different
surfaces
N/A
Distance through insulation .................................. : (See appended table 5.4.4.5) N/A
Number of insulation layers (pcs) ...................... :

G.13.6 Tests on coated printed boards N/A
G.13.6.1 Sample preparation and preliminary inspection N/A
G.13.6.2a) Thermal conditioning N/A
G.13.6.2b) Electric strength test N/A
G.13.6.2c) Abrasion resistance test N/A
G.14 Coating on components terminals
N/A
G.14.1 Requirements ....................................................: (See G.13) N/A
G.15 Liquid filled components
N/A
G.15.1 General requirements No LFC N/A
G.15.2 Requirements N/A
G.15.3 Compliance and test methods N/A
G.15.3.1 Hydrostatic pressure test N/A
G.15.3.2 Creep resistance test N/A
G.15.3.3 Tubing and fittings compatibility test N/A
G.15.3.4 Vibration test N/A
G.15.3.5 Thermal cycling test N/A
G.15.3.6 Force test N/A
G.15.4 Compliance N/A
G.16 IC including capacitor discharge function (ICX)
N/A
a) Humidity treatment in accordance with sc5.4.8 –
120 hours
No ICX N/A
b) Impulse test using circuit 2 with Uc = to transient
voltage ............................................................... :
N/A
C1) Application of ac voltage at 110% of rated voltage
for 2.5 minutes
N/A
C2) Test voltage ....................................................... :

D1) 10,000 cycles on and off using capacitor with
smallest capacitance resistor with largest
resistance specified by manufacturer
N/A
D2) Capacitance ....................................................... :

D3) Resistance ......................................................... :
