User's Manual

Pg. 11V12092021

Handle Assembly (See Step 2 Figure)

WHEN ASSEMBLING, CAREFULLY ALIGN THE GROOVE ON THE HANDRAIL WITH CONVEX PARTS ON THE

PLASTIC BUSHING IN TUBE ASSEMBLY (REFER A & B IN STEP 2 FIGURE)

A.) Loosen the right handle adjustment knob 2-3 turns. This will allow the arm to slide in.

B.) Slide the Right Handlebar Assembly (13) into the Swing Arm Assembly R (106).

Adjust to desired position and tighten.

WARNING: Check to make sure the Right Handle Assembly has an “R” Sticker on it.

Accidental switching of the Right and Left Handle Assemblies can result in serious injury.

C.) Loosen the left handle adjustment knob 2-3 turns. This will allow the arm to slide in.

D.) Slide the Left Handlebar Assembly (12) into the Left Swing Arm Sleeve (105). Adjust to

desired position and tighten.

Loose

WARNING: CHECK TO MAKE SURE THE

HANDLES CURVE AWAY FROM THE UNIT.

ACCIDENTAL SWITCHING OF THE RIGHT AND LEFT

HANDLE ASSEMBLIES CAN RESULT IN SERIOUS INJURY.