User's Manual

Pg. 13V12092021
Installing Seat Back Assembly (See Step 3 Figure)
Assemble Seatback Assembly (52) onto the Seat Slider Assembly. Align with the lower hole
and secure using provided wrench, make sure seatback rotates properly: Insert the Fixed Pin
(20) into the hole on Seat Slider Assembly:
• 1x (99) Lock Nut
• 1x (17) Flat Washer
• 1x (28) M8x 70 Hex Bolt
Installing Seat (See Step 3 Figure)
Secure Seat (1) to Seat Slider Assembly using:
• 4x (34) M8 * 20 Pan Head Screw
• 4x (29) Spring Washer
• 4x (17) Flat Washer
Attaching the Mast
A.) Connect Cable (33) and Cable (32)
B.) Slide the Console Mast (97) onto the Main Frame (85) As seen in Step 3 Figure
• 4x (35) M8x 20 Allen Screw
CAUTION: Make sure not to pinch the mast assembly cables when attaching the console
onto the mounting bracket.
Attaching the Console
A.) The mounting bracket is located on the backside of the Console (8).
B.) Place the back of the console against the upper section of the Console Mast (97).
C.) Attached the Console (8) to the Mast (97) with:
• 1x (30) M6 x 75 Cap Screw
• 1x (39) Flat Washer
• 1x (40) Nylon Lock Nut