Product Manual

2
CAUTION AND WARNING
To prevent injury and damage to your scale, please follow these instructions very carefully:
· Do not transport the scale while platform is loaded. Be sure the scale is tilted enough to assure it is rolling properly on its
wheels when it is moved for cleaning or transported from one area to another.
· For accurate weighing the scale must be placed on a flat, stable surface.
· For accurate weighing, verify proper operation according to the procedure described in this manual before each use.
· Do not use in the presence of flammable materials.
· Operating at other voltages and frequencies than specified could damage the equipment.
· If the “LOW BAT” indicator activates, for accurate weighing replace the batteries or connect the scale to an AC power source,
using the power adapter, as soon as possible, depending on use—see Connectivity section.
· Only authorized, qualified personnel shall service the scale.
This equipment has been tested and found to comply with the EMC limits for the Medical Device Directive 93/42/EEC (EN 55011
Class A and EN 60601-1-2). These limits are designed to provide reasonable protection against harmful interference in a typical
medical installation. The equipment generates, uses and may radiate radio frequency energy and, if not installed and used in
accordance with these instructions, may cause harmful interference to other devices in the vicinity. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference with other devices,
which can be determined by turning the equipment off and on, the user is encouraged to try to eliminate the interference by one or
more of the following measures:
· Reorient or relocate the receiving device.
· Increase the separation between the equipment.
· Connect the equipment into an outlet on a circuit different from that to which the other device(s) is connected.
· Consult Customer Service or a field service technician for help.
DEFINITION OF SYMBOLS
SCALE SPECIFICATIONS
Health o meter® Professional Digital Physician Scale Model 600KL uses sophisticated microprocessor technology. This precision
instrument is designed to provide accurate, reliable and repeatable weight measurements and features that make the weighing
process simple, fast and convenient. The scale is set up to determine the weight of a stationary patient. The weight can be
displayed in pounds or in kilograms. The 600KL features a swivel display which allows for viewing from either side of the scale
plus wheels for easy mobility. The scale can be operated with a power adaptor or by 6-C cell batteries (not included), depending
on use.
Capacity and Resolution: 600 lb x 0.2 lb (272 kg x 0.1 kg)
Power Requirements: 120-240V AC – 6V DC 50-60Hz, Adapter Model ADPT50 (INCLUDED),
or 6 C-cell 1.5V batteries (not included).
Environmental: Operating Temperature: 50°F to 104°F / 10°C to 40° C
Storage Temperature: 30°F to 125°F (-1°C to +52°C)
Maximum Humidity: 85% RH in use or in storage
Platform Dimensions: 14-¾” x 14-11/16” x 2 ¼” / 37.5cm x 37.3cm x 5.7cm
Assembled Dimensions: 14-¾” x 22-11/16” x 54-¼”
(37.5cm x 57.6cm x 137.8cm)
STORAGE SPECIFICATIONS
Storage Temperatures: 30°F to 125°F (-1°C to +52°C)
Humidity: 10% - 85% RH
Atmospheric Pressure: 500hPa – 1060hPa
*WARNING:
For use with AC Adaptor Model ADPT50 or with 6 C-cell batteries.
Complies with C22.2 No. 601.1-M90 and UL Std No. 60601-1. Type BF
applied parts. Internally powered.
Equipment is not suitable for use in the presence of flammable
anesthetic mixture with air nor with oxygen or nitrous oxide.
AC to DC power supply
(6V DC, 500mA)
DC Connector Polarity
Temperature range
(50°F to 104°F / 10°C to 40°C)
Humidity range
(10% - 85% RH)
Atmospheric pressure range
(500hPa – 1060hPa)
Attention, Consult Accompanying Documents
Type BF Applied Parts
AC to DC power supply
Keep dry Fragile