Product Manual

ManualsBrandsHealth-o-meter ManualsDigital ScalesDigital Eye Level Scale w/ Digital Height Rod and Welch Allyn Connectivity Kit

QUICK START OPERATING INSTRUCTIONS - CONTINUED

Using the Keypad

KEY FUNCTION

ON / OFF Turns scale ON and OFF.

ZERO Zeros the scale prior to weighing.

HOLD/RELEASE

Holds the value of the weighed object on the display until the button

is pressed again to clear the value.

UNITS Toggles between kilograms or pounds.

▲ Scrolling method for entering weight when in Calibration mode.

WEIGHT/HEIGHT/

BMI

Toggles the display between the weight reading, height reading and

corresponding Body Mass Index (BMI) reading.

▼ Scrolling method for entering weight when in Calibration mode.

RESET Functions to unlock height and BMI display.

SEND

Used to “lock” the height and BMI display and to send weight, height

and BMI data via the USB port.

MAINTENANCE AND CLEANING

GENERAL

This section provides instructions for maintenance, cleaning, calibration, troubleshooting and operator replaceable parts

for these scales. Maintenance operations other than those described in this section should be performed by qualified

service personnel.

1. This scale contains electronic parts. Use it carefully. Do not drop, kick or jump on it.

2. Do not store near chemicals, heaters or radiators.

3. Do not store any of these scales on their side.

Before first use and after periods of non-use, check the scale for proper operation. If the scale does not operate

correctly, refer to qualified service personnel.

1. Check overall appearance of the total scale for any obvious damage, abuse, etc.

2. Inspect condition of AC adapter cord and prongs, replace if needed.

3. Clean all external surfaces with a clean damp cloth or tissue.

4. Use a domestic cleaning agent or commercially available disinfectant.

CLEANING

Proper care and cleaning is essential to ensure a long life of accurate and effective operation. The following cleaning

agents are compatible with the scale.

Disconnect the scale from the power source, if plugged in

1. Mild Soap and Water Solution. Wipe the outside of the scale with a soft cloth slightly dampened with a mild

detergent solution. Dry with a clean soft cloth.

2. Sani-Cloth or CaviWipes. Wipe the surface of the scale. Allow the surface to dry a minimum of 10 minutes before

using scale.

3. 70 Percent Isopropyl Alcohol. Wipe the surface of the scale with a clean cloth slightly dampened with 70 percent

isopropyl alcohol.

4. 10 Percent Chlorine Bleach Solution. Wipe the scale surface with a soft cloth slightly dampened with a 10 percent

chlorine bleach solution. Rinse with a cloth slightly dampened with water. Allow surface to dry a minimum of 10

minutes before using scale.

5. Never place the any part of these scales in water. Do not spray any of them with liquid.

4. These scales are extremely sensitive weighing devices. Items such as clothing or towels placed or dropped on the scale

may cause a scale to activate. In order to prevent battery depletion, do not store or leave anything on the scale.