Product Manual

USRINSPPR Rev 20110913

PROPLUSROD

Assembly and Operating Instructions

ASSEMBLY INSTRUCTIONS

Before Assembly

The PROPLUSROD is shipped disassembled in one carton. Carefully inspect the carton for shipping damage

before unpacking. If damage is found, contact your shipper or Health o meter® Professional representative

immediately. Claims must be filed with the shipper as soon as possible after receipt of the package, if there are

damages.

Remove all parts from the carton and carefully unwrap to prevent scratching.

Parts List: Please see Figure 1

(1) Telescoping Height Rod

(2) Upper Bracket Halves

(1) Right Lower Bracket

(1) Left Lower Bracket

(1) Bag containing:

(5) M8 1.25 x ¾ Screws

(4) M8 Nuts

Tools Required: No. 5 Metric Allen Wrench (not included)

Figure 1

Telescoping Height Rod

Right Lower BracketLeft Lower Bracket

Upper Bracket Halves

M8 Screws & Nuts

PAGE 1
PROPLUSROD Assembly and Operating Instructions ASSEMBLY INSTRUCTIONS Before Assembly The PROPLUSROD is shipped disassembled in one carton. Carefully inspect the carton for shipping damage before unpacking. If damage is found, contact your shipper or Health o meter® Professional representative immediately. Claims must be filed with the shipper as soon as possible after receipt of the package, if there are damages. Remove all parts from the carton and carefully unwrap to prevent scratching.
PAGE 2
Assembling to a 1100KL, 2101KL or 2500KL Scale with “B” in the Serial Number 1. Determine which side of the handrail the height rod will be mounted to. For the Model 2500KL scale we recommend mounting the height rod to the handrail side opposite the ramp. 2. Using a No. 5 metric allen wrench, remove the two screws holding the handrail to the right or left hand rail support. 3. Place the appropriate lower bracket over the handrail mounting holes and reinstall the two screws.
PAGE 3
OPERATING INSTRUCTIONS Using the Height Rod The height rod telescopes as the headpiece is pulled upward with the most inner section telescoping from 36 inches (91.45cm) to 57½ inches (146cm), followed by the second inner section from 57½ inches (146cm) to 84¼ inches (214cm). The height rod collapses as the headpiece is pushed downward with the second inner section collapsing first, followed by the most inner section. 1.