Model No. HF-TR9700.0 Serial No. __ The serial number is found in the location shown below. Write the serial number in the space above. USER'S MANUAL Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, please see HOW TO CONTACT CUSTOMER CARE on the back cover of this manual. CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. www.HotelFitness.
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. Hotel Fitness and FreeMotion Fitness assume no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning this or any exercise program, consult your physician.
23. When folding or moving the treadmill, make sure that the storage latch is holding the frame securely in the storage position. 19. The pulse sensor is not a medical device. Various factors, including the user's movement, may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general. 24. Inspect and properly tighten all parts of the treadmill regularly. 25.
BEFORE YOU BEGIN Thank you for selecting the new HOTEL FITNESS® TR9700 treadmill. The TR9700 treadmill offers an impressive array of features designed to help you achieve your fitness goals. manual. To help us assist you, please note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual. For your benefit, read this manual carefully before using the treadmill.
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. This is normal and does not affect treadmill performance.
2. Have a second person hold the Right Upright (88) near the Right Base Cover (117). See the inset drawing. Locate the wire tie in the bottom of the Right Upright. Tie the wire tie securely around the end of the Upright Wire (86). Then, pull the other end of the wire tie until the Upright Wire is routed completely through the Right Upright. 2 86 Wire Tie Gently pull up on the Upright Wire (86) as you set the Right Upright (88) on the Base (115) inside the Right Base Cover (117).
4. Set the console assembly face down on a soft surface to avoid scratching the console assembly. 4 Identify the Left Accessory Tray (90) and the Right Accessory Tray (100). 17 17 100 90 Attach the Left Accessory Tray (90) and the Right Accessory Tray (100) to the console assembly with eight #8 x 1/2" Screws (17). Console Assembly 5. With the help of a second person, hold the console assembly near the Uprights (85, 88).
6. Insert the wires from step 5 into the Right Upright (88) as you set the console assembly on the Right Upright and the Left Upright (85). Be careful not to pinch any wires. 6 Attach the console assembly to the Uprights (85, 88) with four 3/8" x 1 1/4" Patch Bolts (1) and four 3/8" Star Washers (8). Start all four Bolts before tightening any of them. Console Assembly 8 8 1 1 85 8 1 88 8 1 7.
9. Raise the Frame (61) to the position shown. Have a second person hold the Frame until this step is completed. Orient the Storage Latch (78) so that the large barrel and the Latch Knob (77) are in the positions shown. 9 Remove the tie from the upper end of the Storage Latch (78). Attach the upper end of the Storage Latch to the bracket on the Frame (61) with a 3/8" x 1 3/4" Bolt (5) and a 3/8" Nut (9). 61 9 Remove the tie from the lower end of the Storage Latch (78).
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets. Your treadmill features a walking belt coated with highperformance lubricant.
CONSOLE DIAGRAM FEATURES OF THE CONSOLE cept iFit interactive workout cards containing workouts designed to help you achieve specific fitness goals. For example, lose unwanted pounds with the 8-week Weight Loss workout, or train for a long-distance run with the Marathon workout. iFit workouts automatically control the treadmill while the voice of a personal trainer coaches you through every step of your workout. iFit cards are available separately.
HOW TO TURN ON THE POWER IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room temperature before turning on the power. If you do not do this, you may damage the console displays or other electrical components. Plug in the power cord (see page 11). Next, locate the reset/off circuit breaker on the treadmill frame near the power cord. Make sure that the circuit breaker is in the “reset” position. HOW TO USE THE MANUAL MODE 1. Insert the key into the console.
4. Change the incline of the treadmill as desired. The Speed display— The Speed display will show the speed of the walking belt. To change the incline of the treadmill, press one of the Incline increase or decrease buttons or one of the incline buttons numbered 0 to 12. The Time display—The Time display will show the elapsed time. Note: When a workout is selected, the display will show the time remaining in the workout instead of the elapsed time.
6. Measure your heart rate if desired. 7. Turn on the fans if desired. Note: If you use the handgrip pulse sensor and the optional chest pulse sensor at the same time, the console will not display your heart rate accurately. See page 20 for information about the optional chest pulse sensor. Before using the handgrip pulse sensor, remove the sheets of clear plastic from the metal contacts. In addition, make sure that your hands are clean. The fans feature high and low speed settings.
HOW TO USE A PRESET WORKOUT segment of the workout. The height of the current segment indicates the speed or incline setting. At the end of each segment, a series of tones will sound and the next segments of the profiles will begin to flash. If a new speed and/or incline setting is programmed for the next segment, the new speed and/or incline setting will appear in the displays for a few seconds. The treadmill will automatically adjust to the new speed and/or incline setting. 1.
HOW TO CREATE A CUSTOM WORKOUT cline setting can be programmed for each segment. To program speed and incline settings for the first segment, simply adjust the speed and incline of the treadmill as desired by pressing the speed and incline buttons. 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 13. 2. Select a custom workout. When the first segment of the workout ends, a series of tones will sound and the current speed and incline settings will be saved in memory.
HOW TO USE A CUSTOM WORKOUT If desired, you can redesign the workout while using it. To change the speed setting or the incline setting for the current segment, simply press the speed or incline buttons. When the current segment ends, the new setting will be saved in memory. To increase the length of the workout, first wait until the workout is completed.
HOW TO USE AN IFIT WORKOUT If the speed or incline setting for the current segment is too high or too low, you can manually override the setting by pressing the speed or incline buttons; however, when the next segment begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. To purchase iFit cards, please see the back cover of this manual or go to www.iFit.com. iFit cards are also available at select stores. 1. Insert the key into the console.
THE INFORMATION MODE THE OPTIONAL CHEST PULSE SENSOR The console features an information mode that keeps track of the total distance that the walking belt has moved and the total number of hours that the treadmill has been used. The information mode also allows you to select miles or kilometers to measure distance, and to turn on and turn off the display demo mode. An optional chest pulse sensor offers hands-free operation as it tracks your heart rate during your workouts.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1 1. Hold the metal frame firmly in the location shown by the arrow at the right.
PREVENTIVE MAINTENANCE Regular maintenance is necessary for optimal performance and long life of the treadmill. Please read and follow all instructions below. If the treadmill is not maintained as described, components may wear excessively, the treadmill may be damaged, and the warranty will be voided. If you have questions about maintenance, please see the back cover of this manual. CAUTION: Make sure to remove the key and unplug the power cord before performing any maintenance procedures.
3. Using a hand-held vacuum, clean the area under the Motor Hood (not shown). Be careful to avoid touching any components. Check the Drive Motor Belt (72) for wear and cracks. If the Drive Belt needs to be replaced, please see the back cover of this manual. 3 72 4. Plug in the power cord and insert the key into the console. Press the Start/Stop button. IMPORTANT: Be careful to avoid injury; keep your hands away from moving parts and make sure that your clothes cannot become caught in moving parts.
SIX-MONTH PREVENTIVE MAINTENANCE RECORD Photocopy this form and use it to record the preventive maintenance performed on the treadmill. Each copy of the form can be used for six months (26 weeks). When maintenance is performed, write the date in the appropriate spaces. Make sure to perform each maintenance procedure as described on pages 22 to 23. If the procedures are not performed as described, components may wear excessively, the treadmill may be damaged, and the warranty will be voided.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the back cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 11).
Lower the treadmill (see HOW TO LOWER THE TREADMILL FOR USE on page 21). Remove the four indicated #8 x 3/4" Screws (7), and remove the Motor Hood (66). 7 66 Next, locate the Reed Switch (48) and the Magnet (124) on the left side of the Pulley (54). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in. (3 mm).
PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left idler roller bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt.
EXERCISE GUIDELINES WARNING: Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems. The pulse sensor is not a medical device. Various factors may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general. These guidelines will help you to plan your exercise program.
PART LIST—Model No. HF-TR9700.0 To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 4 4 2 1 1 1 39 10 10 2 1 1 1 2 4 2 57 1 2 2 12 2 2 2 10 9 4 4 6 1 2 4 4 1 1 4 2 8 2 2 4 2 1 1 2 2 1 1 2 2 Description Key No. Qty.
Key No. Qty. 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 2 1 1 1 1 1 1 1 1 1 1 3 4 16 1 Description Key No. Qty.
16 31 41 9 65 20 37 121 114 42 26 43 40 127 16 114 45 31 64 44 114 37 20 114 46 15 114 7 42 114 7 48 47 60 7 7 49 114 19 22 51 45 114 54 41 33 114 26 40 114 13 28 53 23 52 26 124 7 50 10 34 26 61 7 19 14 9 15 55 56 18 7 17 46 7 25 57 59 50 87 33 28 7 51 22 53 23 60 7 26 25 63 49 25 33 28 58 EXPLODED DRAWING A—Model No. HF-TR9700.
EXPLODED DRAWING B—Model No. HF-TR9700.
EXPLODED DRAWING C—Model No. HF-TR9700.
EXPLODED DRAWING D—Model No. HF-TR9700.
EXPLODED DRAWING E—Model No. HF-TR9700.
HOW TO CONTACT CUSTOMER CARE If you have questions after reading this manual, or if parts are damaged or missing, please contact Customer Care at the phone number, email address, or postal address listed below. Please note the model number, serial number, and name of the product (see the front cover of this manual) before contacting Customer Care.
