Owner's Manual

11
12. Firmly tighten the four 3/8" x 2 3/4" Patch Bolts
(7) and the four 3/8" x 1 1/4" Patch Bolts (8)
(only one side is shown).
Press the Left Base Cover (83) and the Right
Base Cover (84) onto the Base (91) until they
snap into place.
12
13. Make sure that there is a piece of cardboard
below the rear of the Frame (57).
IMPORTANT: See page 13 and plug in the
power cord. Next, see page 15 and turn on
the power.
Then, press the Incline increase button
once.
When the Frame (57) stops moving, remove
the key from the console and unplug the
power cord.
13
57
84
8
83
91
7
Cardboard
11. Attach the Left Tray (104) and the Right Tray
(105) to the console assembly with six #8 x 1/2"
Screws (1).
11
1
104
105
1
IMPORTANT:
Make sure to follow
all instructions in
this step