Owner's Manual

5. Identify the Left Base Cover (83) and the Right

Base Cover (84). Slide the Left Base Cover onto

the Left Upright (88). Slide the Right Base Cover

onto the Right Upright (89). Do not press the

Base Covers into place yet.

. Hold the Left Upright (88) against the Base

(91). Be careful not to pinch the Upright

Wire (77) or the Ground Wire (90). Insert two

3/8" x 2 3/4" Patch Bolts (7) and two 3/8" x 1

/4" Patch Bolts (8) with two 3/8" Star Washers

(13) into the Left Upright.

Partially tighten the 3/8" x 2 3/4" Patch Bolts (7)

nd the 3/8" x 1 1/4" Patch Bolts (8) until the

heads of the Patch Bolts touch the Left Upright

(88); do not fully tighten the Patch Bolts yet.

Attach the Right Upright (not shown) in the

same way. Note: There are no wires on the

right side.

77, 90