Owner's Manual

9
6. Identify the Left Handrail (81) and the Right
Handrail (82). Attach the Handrails to the Pulse
Bar Bottom (87) with four 3/8" x 3/4" Patch Bolts
(
9). Start all four Patch Bolts, and then
tighten each of them.
6
81
87
8
2
9
9
7. Hold the Pulse Bar Top (86) near the Pulse Bar
Bottom (87). Insert the pulse wire from the Pulse
Bar Top into the Left Handrail (81) and out of
the large hole in the Pulse Bar Bottom.
Attach the Pulse Bar Top (86) to the Pulse Bar
Bottom (87) with seven #8 x 1/2" Screws (1). Be
careful not to pinch the pulse wire. Start all
seven Screws, and then tighten each of
them.
7
87
86
Pulse
Wire
81
1
1
1
1
1
8. Hold the pulse bar assembly near the Left and
Right Uprights (88, 89). Insert the pulse wire on
the pulse bar assembly through the rectangular
hole in the top of the Left Upright and out of the
front of the Upright.
Attach the pulse bar assembly to the Uprights
(88, 89) with four 3/8" x 4 1/2" Patch Bolts (5) and
four 3/8" Star Washers (13); do not fully tighten
the Patch Bolts yet.
Remove the wire tie from the Upright Wire (77).
13
5
13
5
8
Pulse Bar
Assembly
Pulse
Wire
89
88
Wire
Tie
77