Manualshelf

Instructions / Assembly

ManualsBrandsHealthSmart ManualsBlood Pressure MonitorsStandard Series Digital Wrist Pressure Monitor in Black
11121314151617181920
12
BATTERY INSTALLATION/REPLACEMENT
Replace the batteries when the Low Battery symbol
appears on the display, Fig. 1, or when the display
remains blank when the POWER Button is pressed.
To change the batteries:
1. Open the battery cover, Fig. 2.
2. Making sure the battery polarity is correct, install two
AAA alkaline batteries.
3. Close the battery cover.
NOTE: It is recommended to remove the batteries if the unit will
not be used for an extended period of time.
The monitor, the batteries and the cuff must be
disposed of according to local regulations at the end of their usage.
Fig. 1
Fig. 2