Model#: SP6616 USER MANUAL Please carefully check the unit and make sure there is no damage when you open the carton. QUESTIONS, PROBLEMS, OR MISSING PARTS? Please Contact Customer Service Before Returning to Store www.soupro.com servicespi@sourceproinc.com +1-844-455-4621 If parts are damaged or missing please call customer service for replacements. DO NOT RETURN THIS PRODUCT TO THE RETAILER.
GENERAL INFORMATION TABLE OF CONTENTS • GENERAL INFORMATION Package Contents 2 Safety Instructions 3 Warranty 4 • ASSEMBLY INSTRUCTIONS Preparation 5 Assembly 7 • FIREBOX OPERATIONS Safety Information 13 Operating Instructions 14 Care And Maintenance 15 Troubleshooting 15 PACKAGE CONTENTS Fireplace Mantel SP6616 2 Firebox SP1816SC-HE
GENERAL INFORMATION SAFETY INSTRUCTIONS Please read and understand this entire manual before attempting to assemble, operate or install the product. IMPORTANT NOTICE and injury to persons, including the following: WARNING: Place this unit in a location that avoids direct sunlight and high temperatures. WARNING: Plastic bags, nails, etc. should be kept out of reach of children. WARNING: This appliance is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces.
GENERAL INFORMATION WARRANTY 1-YEAR LIMITED WARRANTY Source Pro Industries Ltd. (hereinafter referred to collectively as “the Company”) warrants that your new HearthPo Electric Fireplace is free from manufacturing and materials defects for a period of one (1) year from date of purchase. Subject to the following conditions and limitations: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
PREPARATION IMPORTANT INFORMATION 1. Before you begin, locate the instructions and hardware. Be sure you have all of the parts and can identify them. 2. cardboard. 3. Assembly of this product may require more than one person. ASSEMBLY INSTRUCTIONS WARNING 1. Do not let any sharp objects touch or rub the surface of the product. 2. When assembling, do not let children play around the working area. 3. 4. Do not tighten all bolts and screws completely until the entire unit has been assembled and set up. 5.
PREPARATION Parts List I ASSEMBLY INSTRUCTIONS J E D M K G J C B M A L 6 F H A x1 G x1 B x1 H x1 C x1 I x1 D x1 J x2 E x1 K x1 F x1 L x1 M x2
ASSEMBLY Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. 1. H BB G BB EE A EE BB BB EE EE BB E BB EE B EE BB EE BB EE EE BB BB BB BB C EE BB BB EE EE ASSEMBLY INSTRUCTIONS EE EE EE EE BB BB EE EE BB BB EE EE BB BB F 2.
ASSEMBLY Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. 3. ASSEMBLY INSTRUCTIONS 4.
ASSEMBLY Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. 5. I ASSEMBLY INSTRUCTIONS BB BB BB BB JJ JJ JJ 6.
ASSEMBLY Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. 7. ASSEMBLY INSTRUCTIONS 8.
ASSEMBLY Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. 9. ASSEMBLY INSTRUCTIONS 10.
ASSEMBLY Do not fully tighten screws during assembly. Only tighten when all parts are installed in place. 11.
SAFETY INFORMATION Firebox Model SP1816SC-HE ATTENTION: warranty. WARNING: • If the information in this manual is not followed exactly, an electric shock or fire may result causing property damage, personal injury or loss of life. FIREBOX OPERATIONS CAUTION: • (0.9m) from the front of the heater and away from the side and rear. IMPORTANT INSTRUCTIONS and injury to persons, including the following: 1. 2. 3. 4. 5. 6. 7. Read all instructions before installing or using this heater.
SAFETY INFORMATION ELECTRICAL CONNECTION: • A 15-amp, 120-volt, 60 Hz circuit with a properly grounded outlet is required. Preferably, the fireplace will be on a dedicated circuit as other appliances on the same circuit may cause the circuit breaker to trip or the fuse to blow when the heater is in operation. The unit comes standard with 6-ft. three-wire cord, exiting from the rear of the fireplace. DO NOT exceed the current rating of the current tap.
CARE AND MAINTENANCE CLEANING INFORMATION: • Make sure the unit is turned off, unplugged and the heating elements of heater are cool whenever you are cleaning the heater. • Clean the metal trim using a water-dampened, soft, and clean cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim. • The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and require no further lubrication.
QUESTIONS, PROBLEMS, OR MISSING PARTS? Please Contact Customer Service Before Returning to Store www.soupro.com Ver. 1 servicespi@sourceproinc.com +1-844-455-4621 Crafted in China Distributed by Source Pro Industries Ltd. Workshop 15 & 18, 10/F Metro Centre No.