Installation Guide

76
Okay if Shingle Overlaps.
Está bien si la teja so-
bresale.
Flush to dripedge
Nivelado al borde del gotero
1"
(2.5 cm)
NAILS
CLAVOS
Sealing Strip
1"
(2.5 cm)
1/2"
(1.3 cm)
6 Bundles/bultos
8 Bundles/bultos
Building Size Shingles Needed
Tejas necesarias
SHINGLES
(Not Included)
TEJAS
(No Incluidas)
Dimensiones del edifi cio
10’ x 12’
(305 x 366 cm)
10’ x 16’
(305 x 488 cm)
Clavos
Line up notch on top of Shingle with
edge of Roof to stagger the Shingles.
Alinee el corte encima de la teja con el
borde del techo para escalonar las tejas.
Flush to edge, stagger each row.
Nivele al borde, escalone cada fi la.
Maintain same deminsion across.
Mantenga la misma dimensión de
un lado al otro.
Remove overhanging shingles.
Quite tejas sobresalientes.
Install fi rst row backwards.
Instale la primera fi la al revés.