12x8 Metropolitan Instructions
11
48"
(121,9 cm)
144"
(365,8 cm)
6"
(15,2 cm)
12"
(30,5 cm)
Move to the opposite side. Using the long edge of the panel as a lever, move the
panel side-to-side until the top corner is ush to the oor frame (Fig.B).
Secure panel with two 2" nails in the corners.
2
BEGIN
1
3
4
Continue attaching the panel using 2" nails 6" apart on
edges and 12" apart inside panel.
Use a chalk line or use pre-painted grid lines to nail
into joists under panel.
Ensureyouroorframeissquarebyinstallingonepanel
andsquaringframe.
Fig.A
Check the oor frame is square by measuring diagonally
across the frame corners. If the measurements are the
same your oor frame is square. The measurement will
be approximately 169-13/16" (431,3 cm) (Fig.C).
PARTSREQUIRED:
x1
x50
5/8 x 48 x 96"
(1,6 x 121,9 x 243,8 cm)
Gridlinesup
Seam
Seam
2" (5,1 cm)
Flush
Flush
(2)Nails
FLOOR PANELS
3/4"
(1,9 cm)
Fig.B
Flush
(2)Nails
3/4"
(1,9 cm)
Attach the 48 x 96" panel with the rough side up (painted-grid lines side) with the 48"
edge and corner ush to the oor frame (FigA). Secure panel with two 2" nails in the
corners.
DOOR
Fig.C
DOOR
169-13/16"
(431,3 cm)
169-13/16"
(431,3 cm)
DOOR