12x8 Metropolitan Instructions
15
BACK WALL PANELS
48 x 72"
(121,9 x 213,4 cm)
PARTSREQUIRED:
x1
x45
2" (5,1 cm)
Fig.B
Fig.A
3/4"
(1,9 cm)
3/4"
(1,9 cm)
2 Nails
2 Nails
Place 48x72" panel onto wall frame with primed side up as shown.
Use the gauge block to mark the 3/4" measurement on the wall stud. Secure panel with
two 2" nails in the corners (Fig.A).
Nail the panel using 2" nails 6" apart on edges and 12" apart inside panel.
•Ensureyourwallframeissquarebyinstallingonepanelandsquaringframe.
Move to the opposite end. Using the long edge of the panel as a lever move the panel side-to-side until you have
a 3/4" measurement on the wall stud. Secure corner with two 2" nails (Fig.B).
4
5
3
3/4"GAUGE
BLOCK
GAA
Primed
side up
Forsquarenessmaintain3/4"
measurementalongpaneledges.
BEGINHERE
3/4"GAUGE
BLOCK
•Ensuretopofpanelisoverhangingthetopofframeby4".
6"
(15,2 cm)
4"
(10,2cm)
3/4"
(1,9 cm)
3/4"
(1,9 cm)
48"
(121,9 cm)
12"
(30,5 cm)