12x8 Metropolitan Instructions

DOOR
25
2 x 4 x 93-3/16" (5,1 x 10,2 x 236,7 cm)
x2
BOA
BOA
BOA
3" (7,6 cm)
x8
OUTER RAFTER INSTALLATION
PARTSREQUIRED:
3"(7,6cm)
Screw
3"(7,6cm)
Screw
BEGIN
Rest one outer rafter on front and back wall doublers. Ensure rafter is ush to back wall
panel (Fig.A) and ush to end of back wall doubler (Fig.B).
Secure back of outer rafter using 3" screw installed centered into outer rafter end (Fig.
A) and afterwards toenailed into inside of rafter (Fig.B).
Secure front of outer rafter using 3" screws installed centered into outer rafter end (Fig.C)
and afterwards toenailed into inside of rafter (Fig.D).
Repeat Steps 1-4 for opposite side outer rafter.
Orient front of outer rafter ush to front wall panel (Fig.C) and ush to end of front wall
doubler (Fig.D).
1
2
4
5
3
3"(7,6cm)
Screw
Flush
Fig.A
3"(7,6cm)
Screw
Flush
Fig.C
3"(7,6cm)
Screw
toenailed
Flush
Fig.B
3"(7,6cm)
Screw
toenailed
Flush
Fig.D
DONOTOVER-DRIVESCREWTHROUGHPANEL.