12x8 Metropolitan Instructions

3/8 x 48 x 84-3/4"
(1 x 121,9 x 215,3 cm)
x1
3/8 x 42 x 96"
(1 x 106,7 x 243,8 cm)
x1
29
PARTSREQUIRED:
SIDE WALL PANELS
x12
1-1/2" (3,8 cm)
3/8 x 42 x 96"
(1 x 106,7 x 243,8 cm)
x1
3/8 x 48 x 84-3/4"
(1 x 121,9 x 215,3 cm)
x1
x3
2" (5,1 cm)
1-1/2 x 2-1/2 x 69" (3,8 x 6,3 x 175,3 cm)
x1
OO
Place 42x96" panel primed side out onto OO ledge board ush with front wall stud. Ensure 1" overhang at
bottom of panel. Secure panel with two 2" nails in the corners (Fig.A). Ensure the measurement between
the panel edges are the same along the entire length (Fig.B). Angle nails to hit oor frame (Fig.C).
Attach OO as a support-ledge to to help install side wall panels. Measure down from oor 1" and mark.
Ensure OO is level and centered. Secure to oor joist with two 3" screws.
Move to the top of panel. Using the long edge of the panel as a lever move the panel side-to-side until top of
panel is ush with front wall stud. Secure upper corner with (1) 1-1/2" nail into rafter (Fig.D). Ensure 1" panel
overhang at bottom of panel (Fig.D).
3
2
1
Fig.D
1-1/2"Nail
Flush
1"
(2,5 cm)
BEGIN
Fig.A
Fig.C
Fig.B
2" Nails
42"
(106,7 cm)
1"
(2,5 cm)
Primed
side out
Flush
Flush
Same
Measurement
3" (7,6 cm)
x2
1" (2,5 cm) 1" (2,5 cm)
TEMPORARYSUPPORT
3" Screws
LEVEL
OO
OO