Installation Guide

55
MONKEY BAR
MONKEY BAR
INSTALL - STEP 2
INSTALL - STEP 3
LEFT SIDE
LEFT SIDE
Drill-Through 3/16" marked locations.
Re-Drill through using 7/16" bit from outside of
frame at each support hole location.
SEE PAGE 8
SEE PAGE 8
Flush at
bottom.
4-1/2" FROM INSIDE OF 3x3 CORNER POST.
Flat
Washer
Flat
Washer
Lock
Washer
Lock
Washer
2-1/2" Hex Bolt
2-1/2" Hex Bolt
T-Nut
T-Nut