User Guide

23
When lighting top burners manually, set control to
the medium setting to prevent potential injury from
the flame when replacing the grate.
When lighting oven burner manually, light the burner
at the igniter. Keep hands and clothing away from
open flame!
Oven Burner and Igniter
Top Burner Control
Figure 18
Figure 19
Power Failure Operation
If electrical power is interrupted in your area, you can still cook meals on your Heartland gas range. By following these
.
Caution: make sure your hands and clothing are clear of the burner you are lighting!
Manually Lighting the Top Burners
1) Remove cast grate for unobstructed access to the
burner head.
2)
3) Push in and turn the corresponding control knob to the
medium setting.
4)
5)
Please note that the “auto reignition” feature will not function without electricity, therefore pay
close attention to any burners in use while electrical power is interrupted!
Manually Lighting the Oven Burner
The oven can be operated safely by lighting the oven burner in
the following manner:
1) Remove the oven bottom.
2)
beside the igniter. We recommend a barbecue lighter as
3) Push in and hold down the knob, continue to hold down
the oven knob and select the desired oven temperature.
4) You must hold oven knob down for at least 5-6 seconds
after ignition to activate the oven safety thermocouple.
5)
Release oven knob. This will prevent any further gas from
going into the oven. Wait at least 1 minute before trying to
light oven again. If you are still not successful see “trouble
shooting guide”.
6) Place oven bottom back into position. Keep fingers and
Please note that the sensing auto shutoff feature is still functional without the
of electricity so if for any reason the goes out, the gas supply to the oven is shut off
automatically!
e.