Product Manual

www.heartway.com.tw
18
The power wheelchair is simple to operate. However, we recommend that you read carefully the
following instructions to become familiarized with your new vehicle.
A Word of Caution:
Before you turn the power on, always be aware of the environment that surrounds you to select your
desired speed. For indoor environments we recommend that you select the slowest speed setting. For
outdoor operation of this vehicle we recommend that you select a speed that is comfortable for you to
control it safely. The following steps are required to operate your vehicle safely with the P25 controller.
1. On/off Button
The on/off button applies power to the control system electronics, which in turn supply power
to the wheelchair’s motors. Do not use the on/off button to stop the wheelchair unless there is
an emergency. (If you do, you may shorten the life of the wheelchair drive components).
2. Horn Button
The Horn will sound while this button is depressed.
3. Speed Decrease Button
This button decreases the maximum speed setting. Depending on the way the control system
has been programmed a momentary screen may be displayed when the button is pressed.
4. Speed Increase Button
This button increases the maximum speed setting. Depending on the way the control system
has been programmed a momentary screen may be displayed when the button is pressed.
5. Mode Button
The Mode button allows the user to navigate through the available operating Modes for the
control system. The available modes are dependent on programming and the range of
auxiliary output devices connected to the control system.
6. Profile Button
The Profile button allows the user to navigate through the available Profiles for the control
Horn button
Headlight
Button/ LED
On/off button
Hazard button
Left indicator
Button & LED
Right indicator
Button & LED
Speed Button
Decrease
Speed Button
Increase
Joystick
Battery
Condition LED
Tilt Button