Product Manual

25
25
15:Buttons
ITEM SPECIFICATION
Button
Left-
Hand: MODE Button
Right-Hand: SET Button
General Display Mode
(TRIP)
Press SET for 3 seconds to reset TRIP at “00.0”.
Setting Mode
Press MODE and SET
simultaneously for more than 2 seconds. to enter “Setting
Mode”, then 『Hour：MIN』start flashing.
(1) When『Hour』flashing:
Press SET to increase of number, then press MODE to enter “Setting Mode” of
『MIN』.
(2) When『MIN』flashing:
Press SET to increase of number, then press MODE to enter “Setting Mode” of
『km/h & mph』.
(3) When 『km/h』 or 『mph』flashing
Press SET to choose “km/h” or “mph” type, then press .MODE to enter “Setting
Mode” of 『°C / °F』
(4) When『°C』or『°F』flashing
Press SET to choose °C or °F .
Escape from Setting
Mode
Under setting mode, if below situations happened, will auto save the last setting value then
escape to general operation mode.
(1) No any operation of ADJ button for 20 sec.
(2) Press MODE and SET at same time for more than 2 sec.
Operation Status
(1) 『Hour：Min』,『km/h』or『mph』,『°C』or『°F』offer Cyclical Switch function.
(2) When adjusting 『Hour：Min』, press SET to increase number, if press SET for
more than 2 seconds, the number will increase continuously until button released, setting
value with Cyclical Switch function (only 2 seconds from 0 to 9).
* If『Hour』less than 10, the denary “0” doesn’t display.。
Remarks Button tones: one short “Bi” sound