user manual
Owner’s Manual Room Air Conditioner with R-410A Heat Controller, Inc.
7
AIRCONDITIONERFEATURES(CONTINUED)
TOSELECTTHE
OPERATINGMODE:
PresstheMode
button.
DOTHIS:
Tochooseoperatingmode,presstheMode
button.Eachtimeyoupressthebutton,amode
isselectedinasequencethatgoesfrom Auto,
Cool,DryandFan. Theindicatorlightbeside
willbeilluminatedandremainedononcethe
modeisselected.
NOTE:
Tooperateon Autofeature:
Inthismode,thefanspeedcannotbeadjusted,
itstartsautomaticallyataspeedaccordingto
theroomtemperature.Iftheroomdoesnotget
toowarm,it willstayatLowspeed.
TooperateonFanOnly:
Usethisfunctiononlywhencoolingisnot
desired,suchasforroomaircirculationorto
exhauststaleair(onsomemodels).
(Remembertoopentheventduringthisfunction,
butkeepitclosedduringcoolingformaximum
coolingefficiency.) Youcanchooseanyfan
speedyouprefer.
Duringthis function,thedisplaywillshowthe
actualroomtemperature
,notthesettemper-
atureasinthecoolingmode.
TOUSETHEENERGY
SAVERFEATURE:
Pressthebutton
DOTHIS:
Inthismode,thefanwillcontinuetorunfor
3minutesafterthecompressorshutsoff. The
fanthencyclesonfor2minutesat10minute
intervalsuntilthe roomtemperatureisabove
thesettemperature,atwhichtimethe
compressorturnsbackonandcoolingstars.
NOTE:
SLEEPFEATURE:
PressSleep
button
DOTHIS:
Inthismodetheselectedtemperaturewill
increaseby2degreesF30minutesafterthe
modeisselected. Thetemperaturewillthen
increasebyanother2degreesFafteran
additional30minutes. Thisnewtemperature
willbemaintainedfor7hoursbeforeitreturns
totheoriginallyselectedtemperature. This
endstheSleepmodeandtheunitwillcontinue
tooperateasoriginallyprogrammed. The
Sleepmodeprogramcanbecancelledatany
timeduringoperationbyagainpressingthe
Sleepbutton.
NOTE:
7
Timer
Temp.
S
Exhaust
closed
open
Mode
Energy
Saver
Tim er
on
Tim er
off
Timer
Temp.
Auto Cool Dry Fan
Timer
Temp.
S
Exhaust
closed
open
Mode
Energy
Saver
Tim er
on
Tim er
off
Timer
Temp.
Auto Cool Dry Fan
Timer
Temp.
Timer
Temp.
Sleep
Check
Filter
ON/
OFF
Follow
Me
Auto
Med
Low
High
Fan
Clean
Air
TooperateonDrymode:
Inthismode,theairconditionerwillgenerally
operateintheformofadehumidifier.Sincethe
conditionedspaceisaclosedorsealedarea,
somedegreeofcoolingwillcontinue.
AIRCONDITIONERFEATURES(CONTINUED)
TOSELECTTHE
OPERATINGMODE:
PresstheMode
button.
DOTHIS:
Tochooseoperatingmode,presstheMode
button.Eachtimeyoupressthebutton,amode
isselectedinasequencethatgoesfrom Auto,
Cool,DryandFan. Theindicatorlightbeside
willbeilluminatedandremainedononcethe
modeisselected.
NOTE:
Tooperateon Autofeature:
Inthismode,thefanspeedcannotbeadjusted,
itstartsautomaticallyataspeedaccordingto
theroomtemperature.Iftheroomdoesnotget
toowarm,it willstayatLowspeed.
TooperateonFanOnly:
Usethisfunctiononlywhencoolingisnot
desired,suchasforroomaircirculationorto
exhauststaleair(onsomemodels).
(Remembertoopentheventduringthisfunction,
butkeepitclosedduringcoolingformaximum
coolingefficiency.) Youcanchooseanyfan
speedyouprefer.
Duringthis function,thedisplaywillshowthe
actualroomtemperature
,notthesettemper-
atureasinthecoolingmode.
TOUSETHEENERGY
SAVERFEATURE:
Pressthebutton
DOTHIS:
Inthismode,thefanwillcontinuetorunfor
3minutesafterthecompressorshutsoff. The
fanthencyclesonfor2minutesat10minute
intervalsuntilthe roomtemperatureisabove
thesettemperature,atwhichtimethe
compressorturnsbackonandcoolingstars.
NOTE:
SLEEPFEATURE:
PressSleep
button
DOTHIS:
Inthismodetheselectedtemperaturewill
increaseby2degreesF30minutesafterthe
modeisselected. Thetemperaturewillthen
increasebyanother2degreesFafteran
additional30minutes. Thisnewtemperature
willbemaintainedfor7hoursbeforeitreturns
totheoriginallyselectedtemperature. This
endstheSleepmodeandtheunitwillcontinue
tooperateasoriginallyprogrammed. The
Sleepmodeprogramcanbecancelledatany
timeduringoperationbyagainpressingthe
Sleepbutton.
NOTE:
7
Timer
Temp.
S
Exhaust
closed
open
Mode
Energy
Saver
Tim er
on
Tim er
off
Timer
Temp.
Auto Cool Dry Fan
Timer
Temp.
S
Exhaust
closed
open
Mode
Energy
Saver
Tim er
on
Tim er
off
Timer
Temp.
Auto Cool Dry Fan
Timer
Temp.
Timer
Temp.
Sleep
Check
Filter
ON/
OFF
Follow
Me
Auto
Med
Low
High
Fan
Clean
Air
TooperateonDrymode:
Inthismode,theairconditionerwillgenerally
operateintheformofadehumidifier.Sincethe
conditionedspaceisaclosedorsealedarea,
somedegreeofcoolingwillcontinue.
AIRCONDITIONERFEATURES(CONTINUED)
TOSELECTTHE
OPERATINGMODE:
PresstheMode
button.
A uto
C ool
D ry
Fan
Low
A uto
M ed
H igh
Clean
Air
Fan
M ode
Follow
Me
Energy
Saver
On/Off
DOTHIS:
Tochooseoperatingmode,presstheModebutton.
Eachtimeyoupressthebutton,amodeisselected
inasequencethatgoesfrom Auto,Cool,Dryand
Fan. Theindicatorlightbesidewillbeilluminated
andremainedononcethemodeisselected.
NOTE:
Tooperateon Autofeature:
Inthismode,thefanspeedcannotbeadjusted,it
startsautomaticallyataspeedaccordingtothe
roomtemperature.Iftheroomdoesnotgettoo
warm,it willstayatLowspeed.
TooperateonFanOnly:
Usethisfunctiononlywhencoolingisnotdesired,
suchasforroomaircirculationortoexhauststale
air(onsomemodels).(Remembertoopenthevent
duringthisfunction,butkeepitclosedduring
coolingformaximumcoolingefficiency.) Youcan
chooseanyfanspeedyouprefer.
Duringthisfunction,thedisplaywillshowtheactual
roomtemperature,no
tthesettemperatureasinthe
coolingmode.
TOUSETHEENERGY
SAVERFEATURE:
Pressthebutton
A uto
C ool
D ry
Fan
Low
A uto
M ed
H igh
Clean
Air
Fan
M ode
Follow
Me
Energy
Saver
On/Off
DOTHIS:
Inthismode,thefanwillcontinuetorunfor3minutes
afterthecompressorshutsoff. Thefanthencycles
onfor2minutesat10minuteintervalsuntiltheroom
temperatureisabovethesettemperature,atwhich
timethecompressorturnsbackonandCoolingStars.
NOTE:
Temp Temp
Timer
Timer
On
Off
S leep
Check
Filter
Timer
A uto
C ool
D ry
Fan
Low
A uto
M ed
H igh
Clean
Air
SLEEPFEATURE:
PressSleep
button
DOTHIS:
Inthismodetheselectedtemperaturewillincreaseby
4 F(2 or3 C)inthefirsthourafterthemodeisselected.
Thisnewtemperaturewillbemaintainedforanother6
hoursbeforeitreturnstotheoriginallyselected
temperature. ThisendstheSleepmodeandtheunit
willcontinuetooperateasoriginallyprogrammed.
TheSleepmodeprogramcanbecancelledatany
timeduringoperationbyagainpressingtheSleep
button.
O OO
NOTE:
7
TooperateonDrymode:
Inthismode,theairconditionerwillgenerally
operateintheformofadehumidifier.Sincethe
conditionedspaceisaclosedorsealedarea,some
degreeofcoolingwillcontinue.
starts.
In the mode, the air conditioner will generally operate in
the form of a dehumidiî‚¿er to remove moisture from the air.
Since the conditioned space is a closed or sealed area,
some degree of cooling will continue.
Cool, Dry and Fan. The indicator light beside each
mode will be illumniated and remain on once the mode
is selected.
TO USE THE ENERGY
SAVER FEATURE:
AIRCONDITIONERFEATURES(CONTINUED)
TOSELECTTHE
OPERATINGMODE:
PresstheMode
button.
DOTHIS:
Tochooseoperatingmode,presstheMode
button.Eachtimeyoupressthebutton,amode
isselectedinasequencethatgoesfrom Auto,
Cool,DryandFan. Theindicatorlightbeside
willbeilluminatedandremainedononcethe
modeisselected.
NOTE:
Tooperateon Autofeature:
Inthismode,thefanspeedcannotbeadjusted,
itstartsautomaticallyataspeedaccordingto
theroomtemperature.Iftheroomdoesnotget
toowarm,it willstayatLowspeed.
TooperateonFanOnly:
Usethisfunctiononlywhencoolingisnot
desired,suchasforroomaircirculationorto
exhauststaleair(onsomemodels).
(Remembertoopentheventduringthisfunction,
butkeepitclosedduringcoolingformaximum
coolingefficiency.) Youcanchooseanyfan
speedyouprefer.
Duringthis function,thedisplaywillshowthe
actualroomtemperature
,notthesettemper-
atureasinthecoolingmode.
TOUSETHEENERGY
SAVERFEATURE:
Pressthebutton
DOTHIS:
Inthismode,thefanwillcontinuetorunfor
3minutesafterthecompressorshutsoff. The
fanthencyclesonfor2minutesat10minute
intervalsuntilthe roomtemperatureisabove
thesettemperature,atwhichtimethe
compressorturnsbackonandcoolingstars.
NOTE:
SLEEPFEATURE:
PressSleep
button
DOTHIS:
Inthismodetheselectedtemperaturewill
increaseby2degreesF30minutesafterthe
modeisselected. Thetemperaturewillthen
increasebyanother2degreesFafteran
additional30minutes. Thisnewtemperature
willbemaintainedfor7hoursbeforeitreturns
totheoriginallyselectedtemperature. This
endstheSleepmodeandtheunitwillcontinue
tooperateasoriginallyprogrammed. The
Sleepmodeprogramcanbecancelledatany
timeduringoperationbyagainpressingthe
Sleepbutton.
NOTE:
7
Timer
Temp.
S
Exhaust
closed
open
Mode
Energy
Saver
Tim er
on
Tim er
off
Timer
Temp.
Auto Cool Dry Fan
Timer
Temp.
S
Exhaust
closed
open
Mode
Energy
Saver
Tim er
on
Tim er
off
Timer
Temp.
Auto Cool Dry Fan
Timer
Temp.
Timer
Temp.
Sleep
Check
Filter
ON/
OFF
Follow
Me
Auto
Med
Low
High
Fan
Clean
Air
TooperateonDrymode:
Inthismode,theairconditionerwillgenerally
operateintheformofadehumidifier.Sincethe
conditionedspaceisaclosedorsealedarea,
somedegreeofcoolingwillcontinue.
TO SELECT THE
OPERATING MODE:
Press the Mode
button.
DO THIS:
To choose operating mode, press the Mode
button. Each time you press the button, a mode
is selected in a sequence that goes from Auto,
Cool, Dry and Fan. The indicator light beside
will be illuminated and remained on once the
mode is selected.
NOTE:
To operate on Auto feature:
In this mode, the fan speed cannot be adjusted,
it starts automatically at a speed according to
the room temperature. If the room does not get
too warm, it will stay at Low speed.
To operate on Fan Only:
Use this function only when cooling is not
desired, such as for room air circulation or to
exhaust stale air(on some models).
(Remember to open the vent during this function,
but keep it closed during cooling for maximum
cooling efficiency.) You can choose any fan
speed you prefer.
During this function, the display will show the
actual room temperature, not the set temper-
ature as in the cooling mode.
TO USE THE ENERGY
SAVER FEATURE:
Press the button
DO THIS:
In this mode, the fan will continue to run for
3 minutes after the compressor shuts off. The
fan then cycles on for 2 minutes at 10 minute
intervals until the room temperature is above
the set temperature, at which time the
compressor turns back on and cooling stars.
NOTE:
SLEEP FEATURE:
Press Sleep
button
DO THIS:
In this mode the selected temperature will
increase by 2 degrees F 30 minutes after the
mode is selected. The temperature will then
increase by another 2 degrees F after an
additional 30 minutes. This new temperature
will be maintained for 7 hours before it returns
to the originally selected temperature. This
ends the Sleep mode and the unit will continue
to operate as originally programmed. The
Sleep mode program can be cancelled at any
time during operation by again pressing the
Sleep button.
NOTE:
8
AIR CONDITIONER FEATURES
MODE
ENERGY
SAVER
SLEEP
DOWN
ON/OFF
Follow me
Auto
Cool
Dry
Fan
S
MODE
ENERGY
SAVER
SLEEP
DOWN
ON/OFF
Follow me
Auto
Cool
Dry
Fan
S
MODE
ENERGY
SAVER
SLEEP
DOWN
ON/OFF
Follow me
Auto
Cool
Dry
Fan
S
To operate on Dry mode:
In this mode, the air conditioner will generally
operate in the form of a dehumidifier. Since
the conditioned space is a closed or sealed
area, some degree of cooling will continue.
TO SELECT THE
OPERATING MODE:
Press the Mode
button.
DO THIS:
To choose operating mode, press the Mode
button. Each time you press the button, a mode
is selected in a sequence that goes from Auto,
Cool, Dry and Fan. The indicator light beside
will be illuminated and remained on once the
mode is selected.
NOTE:
To operate on Auto feature:
In this mode, the fan speed cannot be adjusted,
it starts automatically at a speed according to
the room temperature. If the room does not get
too warm, it will stay at Low speed.
To operate on Fan Only:
Use this function only when cooling is not
desired, such as for room air circulation or to
exhaust stale air(on some models).
(Remember to open the vent during this function,
but keep it closed during cooling for maximum
cooling efficiency.) You can choose any fan
speed you prefer.
During this function, the display will show the
actual room temperature, not the set temper-
ature as in the cooling mode.
TO USE THE ENERGY
SAVER FEATURE:
Press the button
DO THIS:
In this mode, the fan will continue to run for
3 minutes after the compressor shuts off. The
fan then cycles on for 2 minutes at 10 minute
intervals until the room temperature is above
the set temperature, at which time the
compressor turns back on and cooling stars.
NOTE:
SLEEP FEATURE:
Press Sleep
button
DO THIS:
In this mode the selected temperature will
increase by 2 degrees F 30 minutes after the
mode is selected. The temperature will then
increase by another 2 degrees F after an
additional 30 minutes. This new temperature
will be maintained for 7 hours before it returns
to the originally selected temperature. This
ends the Sleep mode and the unit will continue
to operate as originally programmed. The
Sleep mode program can be cancelled at any
time during operation by again pressing the
Sleep button.
NOTE:
8
AIR CONDITIONER FEATURES
MODE
ENERGY
SAVER
SLEEP
DOWN
ON/OFF
Follow me
Auto
Cool
Dry
Fan
S
MODE
ENERGY
SAVER
SLEEP
DOWN
ON/OFF
Follow me
Auto
Cool
Dry
Fan
S
MODE
ENERGY
SAVER
SLEEP
DOWN
ON/OFF
Follow me
Auto
Cool
Dry
Fan
S
To operate on Dry mode:
In this mode, the air conditioner will generally
operate in the form of a dehumidifier. Since
the conditioned space is a closed or sealed
area, some degree of cooling will continue.