user manual

Heat Controller, Inc. Room Air Conditioner with R-410A Owner’s Manual
8
AIR CONDITIONER FEATURES (CONTINUED)
TIMER:AUTOSTART/
STOPFEATURE:
Press Timer
button
DOTHIS:
AIRCONDITIONERFEATURES(CONTINUED)
Firstpressthe Timerbutton,the Timeronindicator
lightilluminates.Itindicatesthe AutoStartprogram
isinitiated.
PressorholdtheLeftarroworRightarrowtochange
the Autotimeby0.5hourincrements,upto10hours,
thenat1hourincrementsupto24hours. Thecontrol
willcountdownthe timeremaininguntilstart.
Theselectedtimewillregisterin5secondandthe
systemwillautomaticallyrevertbacktodisplaythe
previoustemperaturesetting.
Performthesameproceduresasabovetosetthe
Timeroffsettings.
Pressthe Temp./Timeradjustbuttontoadjus
tthe
settingtimeto0.0atanytimewillcancelthe
AutoStart/Stopfunction.
NOTE:
CHECKFILTERFEATURE:
PressCheck
Filterbutton
DOTHIS:
Thisfeatureisaremindertocleanthe AirFilterfor
moreefficientoperation. TheLED(light)willillumi-
nateafter250hoursofoperation. Toresetafter
cleaningthefilter,presstheCheckFilterbuttonand
thelightwillgooff.
NOTE:
8
Timer
Temp.
S
Exhaust
closed
open
Mode
Energy
Saver
Tim er
on
Tim er
off
Timer
Temp.
Auto Coo l Dry Fan
Timer
Temp.
Timer
Temp.
Sleep
Check
Filter
ON/
OFF
Follow
Me
Auto
Med
Low
High
Fan
FOLLOWMEFEATURE:
(onsomemodels)
Lightflashing
NOTE:
ToactivatetheFollowMefeature,pointtheremote
controltowardstheunitandpresstheFollowMe
button. Thelightontheunitcontrolpanelwillpulse
toindicateitreceivedthesignal.Itwillcontinueto
sendthissignaluntilthefeatureisdeactivatedby
pressingtheFollowMebuttonagain.If theunitdoes
notreceivetheFollowMesignalduringany7minutes
interval,theunitwillbeeptoindicatetheFollowMe
modehasended. Thedisplayontheremotecontrol
indicatesthetemperatureattheremoteONLY.
Theactualtemperaturecanbedisplayedattheunit
bypressingt
heFanOnlymode.WhenintheCool
mode,theunitdisplayindicatesthesettemperature.
Thisfeaturecanbeactivatedfromtheremote
controlONLY.Theremotecontrolservesasa
remotethermostatallowingfortheprecise
temperaturecontrolatitslocation.
Timer
Temp.
Timer
Temp.
Slee p
Chec k
Filt er
ON/
OFF
Follow
Me
Auto
Med
Low
High
Fan
Clean
Air
Clean
Air
Temp Temp
Timer
Timer
On
Off
S leep
Check
Filter
Timer
A uto
C ool
D ry
Fan
Low
A uto
M ed
H igh
Clean
Air
TIMER:AUTOSTART/
STOPFEATURE:
Press Timer
button
DOTHIS:
AIRCONDITIONERFEATURES(CONTINUED)
Firstpressthe Timerbutton,theindicatorlight
besideswordOnilluminates.Itindicatesthe Auto
Startprogramisinitiated.
PressorholdtheLeftarroworRightarrowtochange
the Autotimeby0.5hourincrements,upto10hours,
thenat1hourincrementsupto24hours. Thecontrol
willcountdownthetimeremaininguntilstart.
Theselectedtimewillregisterin5secondandthe
systemwillautomaticallyrevertbacktodisplaythe
previoustemperaturesetting.
TurningtheunitONorOFFatanytimewillcancelthe
AutoStart/Stopfunction.
NOTE:
Temp Temp
Timer
Timer
On
Off
S leep
Check
Filter
Timer
A uto
C ool
D ry
Fan
Low
A uto
M ed
H igh
Clean
Air
CHECKFILTERFEATURE:
PressCheck
Filterbutton
DOTHIS:
Temp Temp
Timer
Timer
On
Off
S leep
Check
Filter
Timer
A uto
C ool
D ry
Fan
M ed
H igh
Clean
Air
CLEANAIRFEATURE:
(onsomemodels)
PressClean
Airbutton
DOTHIS:
Thisfeatureisaremindertocleanthe AirFilterfor
moreefficientoperation. TheLED(light)willillumi-
nateafter250hoursofoperation. Toresetafter
cleaningthefilter,presstheCheckFilterbuttonand
thelightwillgooff.
NOTE:
PresstheClean Airbutton,theiongeneratorisener-
gizedandwillhelptoremovepollenandimpurities
fromtheair,andtraptheminthefilter.
NOTE:
8
Press the Timer button, the indicator light
the time by 0.5 hour increments, up to 10 hours
seconds and the
TIMER: AUTO START/
STOP FEATURE:
Press Timer
button
DO THIS:
First press the Timer button, the Timer on indicator
light illuminates. It indicates the Auto Start program
is initiated.
Press or hold the UP arrow or DOWN arrow to change
the Auto time by 0.5 hour increments, up to 10 hours,
then at 1 hour increments up to 24 hours. The control
will count down the time remaining until start.
The selected time will register in 5 second and the
system will automatically revert back to display the
previous temperature setting.
Perform the same procedures as above to set the
Timer off settings.
Press the Temp./Timer adjust button to adjust the
setting time to 0.0 at any time will cancel the
Auto Start/Stop function.
NOTE:
CHECK FILTER FEATURE:
Press Check
Filter button
DO THIS:
This feature is a reminder to clean the Air Filter for
more efficient operation. The LED(light) will illumi-
nate after 250 hours of operation. To reset after
cleaning the filter, press the Check Filter button and
the light will go off.
NOTE:
FOLLOW ME FEATURE:
(on some models)
Light flashing
NOTE:
To activate the Follow Me feature, point the remote
control towards the unit and press the Follow Me
button. The light on the unit control panel will pulse
to indicate it received the signal. It will continue to
send this signal until the feature is deactivated by
pressing the Follow Me button again. If the unit does
not receive the Follow Me signal during any 7 minutes
interval, the unit will beep to indicate the Follow Me
mode has ended. The display on the remote control
indicates the temperature at the remote ONLY.
The actual temperature can be displayed at the unit
by pressing the Fan Only mode. When in the Cool
mode, the unit display indicates the set temperature.
This feature can be activated from the remote
control ONLY. The remote control serves as a
remote thermostat allowing for the precise
temperature control at its location.
9
AIR CONDITIONER FEATURES
CLEAN
UP
DOWN
FAN
ON/OFF
Follow me
CHECK
FILTER
TIMER
Auto Low Med
High
ON OFF
CLEAN
UP
DOWN
FAN
ON/OFF
Follow me
CHECK
FILTER
TIMER
Auto Low Med
High
ON OFF
CLEAN
UP
DOWN
FAN
ON/OFF
Follow me
CHECK
FILTER
TIMER
Auto Low Med
High
ON OFF