REMOTE CONTROLLER OWNER’S MANUAL B-SMA/SMH 09/12/18SC Single Zone Mini-Splits B-VMH 09/12/18/24/30/36SC-1 Single Zone Inverter Mini-Splits B-VMH09/12/18FC-1 Multi-Flex Inverter Mini-Splits Heat Controller, Inc. • 1900 Wellworth Ave. • Jackson, MI 49203 • (517)787-2100 • www.heatcontroller.
Owner’s Manual Remote Controller Heat Controller, Inc. Table of Contents Using the remote controller.......................................................................................... 2 Remote controller specifications.................................................................................. 3 Function buttons........................................................................................................... 4 Indicators on LCD display................................................
Heat Controller, Inc. Remote Controller Owner’s Manual Using the Remote Controller Use the remote controller within a distance of 26' 3" (8 meters) from the appliance, pointing it towards the receiver. Reception is confirmed by a beep. receiver housing Remove the battery cover by pressing and sliding it off.
Owner’s Manual Remote Controller Heat Controller, Inc. an extended period of time. Remote Controller Specifications Model* R51l5BG(C)E, R51l6/BG(C)E, R51l7/BG(C)E, R51l8/BG(C)E, R51l9/BG(C)E; R51l10/BG(C)E, R51l11/BG(C)E, R51l12/BG(C)E; Rated Voltage 3.0V (Dry batteries R03/LR03x2 or (2) AAA) Lowest Voltage of CPU Emitting Signal 2.
Heat Controller, Inc. Owner’s Manual Remote Controller Function Buttons AUTO COOL *NOTE: Heat pump models only ION and FOLLOW buttons are optional functions.
Owner’s Manual Remote Controller Heat Controller, Inc. Function Buttons (continued) ECONOMY Button (Sleep Mode) to maintain the most comfortable temperature TIMER OFF Button ION and FOLLOW buttons are optional functions. Press this recessed button to lock all current settings. Use the LOCK mode when you want to prevent settings from being changed accidentally. Press the LOCK button again to cancel the LOCK function.
Heat Controller, Inc. Remote Controller Indicators on LCD Display The temperature setting (from 62°F (17°C) to 88°F (30°C)) or timer setting (0~24h) will be displayed. If FAN mode is selected, there will be no display. A key symbol is displayed when pushing the LOCK button. Push the LOCK button to clear display.
Owner’s Manual REMOTE CONTROLLER Heat Controller, Inc. How to use the buttons Auto operation 2 3 1 Ensure power is available to the unit. The OPERATION indicator on the display panel of the indoor unit illuminates. 1. Press the MODE button to select Auto. 2. Press the TEMP button to set the desired temperature. The temperature can be set within a range of 62°F (17°C)~88°F (30°C) in 2°F (1°C) increments. 3. Press the ON/OFF button to start the air conditioner. NOTE 1.
Heat Controller, Inc. REMOTE CONTROLLER Owner’s Manual Dehumidifying operation 2 1 3 Ensure power is available to the unit. The OPERATION indicator on the display panel of the indoor unit illuminates. 1. Press the MODE button to select DRY mode. 2. Press the TEMP button to set the desired temperature. The temperature can be set within a range of 62°F (17°C)~88°F (30°C) in 2°F (1°C) increments. 3. Press the ON/OFF button to start the air conditioner.
Owner’s Manual Heat Controller, Inc. Remote Controller Pressing the TIMER ON button can set the auto-on time of the unit. And pressing the TIMER OFF button can set the auto-off time of the unit. symbol . SEE NOTE. symbol SEE NOTE ON NEXT PAGE.
Heat Controller, Inc.
Owner’s Manual Remote Controller Heat Controller, Inc.
Heat Controller, Inc. REMOTE CONTROLLER Owner’s Manual ECONOMY (SLEEP MODE) operation When you press the ECONOMY button, the economy/sleep mode running function will be activated, the set temperature will increase (in cooling) or decrease (in heating mode) by 2°F (1°C) over the next 30 minutes and by another 2°F (1°C) after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected temperature.
12/2011