User Guide

Seaside Applications and Installation
8 Wall Mounted Multi-Zone Split System Air Conditioner
Installation of Indoor, Outdoor Unit
1. Air conditioners should not be installed in areas where corrosive gases, such as acid or alkaline gas, are
produced.
2. Do not install the product where it could be exposed to sea wind (salty wind) directly. It can result
in corrosion to the product. Particularly on the condenser and evaporator fins, could
cause product malfunction or inefficient performance.
3.
If the outdoor unit is installed close to the seaside, ensure that it is not exposed directly to
the sea wind.
1) If the outdoor unit is to be installed close to the seaside, direct exposure to the sea wind should be avoided.
Install the outdoor unit on the opposite side of the sea wind direction.
2) To install the outdoor unit on the seaside, set up a windbreaker/barrier, to lessen the unit's exposure to sea air
3) Select a well-drained place.
• It should be strong enough (like concrete) to obstruct
the wind from the sea.
• The height and width should be more than 150% of
the outdoor unit.
• A minimum of 70cm (27.6inches)
of space between outdoor unit and the windbreaker/
barrier for easy air flow.
Sea wind Sea wind
Sea wind
Windbreaker/Barrier
Periodic ( more than once/year ) cleaning of the dust or salt particles stuck on the heat exchanger
using water is recommended.
1. Selecting the location(Outdoor Unit)