Specification Sheet

Saf-T Vent
®
EZ Seal
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
SINGLE WALL AL 29-4C
®
SPECIAL GAS VENT
7
Heatfab
Part Number DIM - A DIM - B DIM - C DIM - D DIM - E
Nominal Nominal Installed Centerline of Installed Distance
Body Tap Length Tap to Outlet from Tap to Body
Diameter Diameter Centerline
9316 3 3 7.5 3.5 4.3
9416 4 4 8.4 4.0 4.4
9516 5 5 9.5 5.5 6.5
9516X3 5 3 9.5 4.5 6.5
9516X4 5 4 10.5 5.0 6.5
9616 6 6 10.5 6.0 7.0
9616X3 6 3 9.5 4.5 7.0
9616X4 6 4 10.5 5.0 7.0
9616X5 6 5 11.5 5.5 7.0
9716 7 7 11.5 6.5 7.5
9816 8 8 12.5 7.0 8.0
91016 10 10 16.5 9.0 9.0
Conduit Tee —
A conduit tee, when installed horizontally, may be fitted with a drain tee cover to create a condensate
drain. Due to its high pressure drop, the conduit tee is generally not used to make a transition from horizontal to vertical. (Use a boot
tee or an elbow.) The takeoffs are not removable on these tees.
Tees, Boot Tees, & Covers:
B
A
C
E
D
Conduit Tee