Specification Sheet

Saf-T Vent
®
EZ Seal
130 Industrial Boulevard • Turners Falls, MA 01376
Phone [phone] • Fax [phone] • www.heat-fab.com
SINGLE WALL AL 29-4C
®
SPECIAL GAS VENT
8
Heatfab
30°
D
E
A
B
C
15°
D
E
A
B
C
Elbows:
15° Elbow — Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam
elbows is not adjustable. The pressure drop for each elbow is equivalent to 3 feet of vent.
15° Elbow
Part Number DIM - A DIM - B DIM - C DIM - D DIM - E
Nominal Rise Run Combined Offset
Diameter Installed Height
9309 3 2.9 2.3 10.6 1.4
9409 4 4.3 2.5 13.3 1.8
9509 5 4.3 2.6 13.6 1.8
9609 6 4.4 2.6 13.8 1.8
9709 7 4.5 2.7 14.1 1.9
9809 8 4.5 2.8 14.4 1.9
9909 9 4.6 2.8 14.6 1.9
91009 10 4.7 2.9 14.9 2.0
91209 12 4.8 3.0 15.4 2.0
91409 14 4.9 3.2 15.9 2.1
91609 16 5.1 3.3 16.4 2.2
30° Elbow — Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam
elbows is not adjustable. The pressure drop for each elbow is equivalent to 3 feet of vent for 3 and 4 inch diameters and 5 feet for
5 through 16 inch diameters.
Part Number DIM - A DIM - B DIM - C DIM - D DIM - E
Nominal Rise Run Combined Offset
Diameter Installed Height
9310 3 3.1 2.8 11.0 3.0
9410 4 4.5 2.8 13.7 3.7
9510 5 4.7 2.9 14.2 3.8
9610 6 4.8 3.1 14.7 3.9
9710 7 4.9 3.2 15.2 4.1
9810 8 5.1 3.3 15.7 4.2
9910 9 5.2 3.5 16.2 4.3
91010 10 5.3 3.6 16.7 4.5
91210 12 5.6 3.9 17.7 4.7
91410 14 5.9 4.1 18.7 5.0
91610 16 6.1 4.4 19.7 5.3
30° Elbow